MCQs – Physics – Circular Motion and Centripetal Force

Circular Motion and Centripetal Force: 50 MCQs

1 Circular motion is the motion of an object along:

(a) A straight line
(b) A circular path
(c) A parabolic path only
(d) None of these

2 An object moving in a circle at constant speed has:

(a) Constant velocity
(b) Zero acceleration
(c) Changing direction of velocity
(d) None of these

3 The rate of change of angular displacement is called:

(a) Angular velocity
(b) Linear momentum
(c) Centripetal force
(d) None of these

4 The SI unit of angular velocity is:

(a) Metre per second
(b) Newton
(c) Joule
(d) None of these

5 One complete revolution corresponds to an angular displacement of:

(a) (\pi) radians
(b) (2\pi) radians
(c) (4\pi) radians
(d) None of these

6 The time taken to complete one revolution is called:

(a) Frequency
(b) Angular acceleration
(c) Period
(d) None of these

7 The number of complete revolutions per second is called:

(a) Frequency
(b) Period
(c) Radius
(d) None of these

8 The SI unit of frequency is:

(a) Second
(b) Metre
(c) Newton
(d) None of these

9 The relationship between frequency (f) and period (T) is:

(a) (f=T)
(b) (f=1/T)
(c) (f=T^2)
(d) None of these

10 The linear speed of an object moving in a circle is related to angular velocity by:

(a) (v=r\omega)
(b) (v=r/\omega)
(c) (v=\omega/r)
(d) None of these

11 The direction of instantaneous linear velocity in circular motion is:

(a) Towards the centre
(b) Away from the centre
(c) Tangential to the circular path
(d) None of these

12 The acceleration of an object in uniform circular motion is directed:

(a) Tangentially
(b) Towards the centre
(c) Away from the centre
(d) None of these

13 The inward acceleration in circular motion is called:

(a) Centripetal acceleration
(b) Tangential velocity
(c) Angular displacement
(d) None of these

14 Centripetal acceleration is given by:

(a) (v/r)
(b) (vr)
(c) (r/v^2)
(d) None of these

15 The centripetal force required for circular motion is:

(a) (mv/r)
(b) (mv^2/r)
(c) (mr/v)
(d) None of these

16 The term centripetal means:

(a) Moving away from the centre
(b) Moving along a straight line
(c) Directed towards the centre
(d) None of these

17 In uniform circular motion, the magnitude of velocity:

(a) Remains constant
(b) Continuously increases
(c) Continuously decreases
(d) None of these

18 In uniform circular motion, the acceleration is non-zero because:

(a) The mass changes
(b) The direction of velocity changes
(c) The radius continuously increases
(d) None of these

19 The centripetal force acting on a satellite in a circular orbit is provided by:

(a) Air resistance
(b) Magnetic force
(c) Gravitational force
(d) None of these

20 The centripetal force acting on a car moving around a level circular road is mainly provided by:

(a) Friction between tyres and road
(b) Gravitational force alone
(c) Air pressure
(d) None of these

21 When a stone tied to a string is whirled in a horizontal circle, the centripetal force is provided by:

(a) Gravity alone
(b) Tension in the string
(c) Air resistance
(d) None of these

22 If the speed of an object moving in a circle doubles while mass and radius remain constant, centripetal force becomes:

(a) Twice
(b) Half
(c) Four times
(d) None of these

23 If the radius of circular motion doubles while speed and mass remain constant, centripetal force becomes:

(a) Half
(b) Twice
(c) Four times
(d) None of these

24 If the mass of an object doubles while its speed and radius remain constant, centripetal force:

(a) Becomes half
(b) Doubles
(c) Becomes four times
(d) None of these

25 A body moves in a circle of radius 2 m at a speed of 4 m/s. Its centripetal acceleration is:

(a) 4 m/s²
(b) 6 m/s²
(c) 8 m/s²
(d) None of these

26 A 2 kg object moves at 4 m/s in a circle of radius 2 m. The required centripetal force is:

(a) 8 N
(b) 16 N
(c) 32 N
(d) None of these

27 A wheel completes 10 revolutions in 5 seconds. Its frequency is:

(a) 2 Hz
(b) 5 Hz
(c) 10 Hz
(d) None of these

28 If the frequency of rotation is 2 Hz, the time period is:

(a) 2 seconds
(b) 0.5 second
(c) 4 seconds
(d) None of these

29 The angular velocity of an object completing one revolution per second is:

(a) (\pi\ rad/s)
(b) (4\pi\ rad/s)
(c) (2\pi\ rad/s)
(d) None of these

30 Centrifugal force is commonly described in a rotating reference frame as:

(a) An outward apparent force
(b) An inward gravitational force
(c) A force that always stops rotation
(d) None of these

31 In an inertial reference frame, the actual force required to maintain circular motion is:

(a) Centrifugal force
(b) Centripetal force
(c) Buoyant force
(d) None of these

32 When a vehicle takes a sharp turn, passengers tend to move outward relative to the vehicle due to:

(a) Inertia
(b) Magnetism
(c) Buoyancy
(d) None of these

33 Banking of roads at curves helps vehicles by:

(a) Eliminating gravity
(b) Increasing their mass
(c) Providing a component of the normal force towards the centre
(d) None of these

34 The maximum safe speed of a vehicle on a level circular road depends partly on:

(a) Its colour
(b) Friction and the radius of the curve
(c) The number of passengers’ names
(d) None of these

35 The motion of the tip of the second hand of a clock is an example of:

(a) Circular motion
(b) Linear motion only
(c) Random motion
(d) None of these

36 The direction of angular velocity for rotation in a plane is determined by:

(a) The right-hand rule
(b) The law of reflection
(c) Archimedes’ principle
(d) None of these

37 The angular displacement in one complete revolution is:

(a) 90°
(b) 180°
(c) 360°
(d) None of these

38 A rotating object completes 60 revolutions per minute. Its frequency is:

(a) 60 Hz
(b) 1 Hz
(c) 30 Hz
(d) None of these

39 The linear speed of a point on a rotating wheel is greatest at:

(a) The centre
(b) The axis of rotation
(c) The outer edge, for a rigid wheel rotating at fixed angular speed
(d) None of these

40 For a rigid rotating body, all points have the same:

(a) Angular velocity
(b) Linear speed
(c) Linear acceleration
(d) None of these

41 The orbital motion of planets around the Sun is primarily maintained by:

(a) Friction
(b) Gravity
(c) Air resistance
(d) None of these

42 A centrifugal governor uses the principles of:

(a) Linear equilibrium only
(b) Heat transfer
(c) Rotational motion and centrifugal effects
(d) None of these

43 A centrifuge separates materials mainly by using:

(a) Rapid rotation
(b) Sound waves
(c) Chemical combustion
(d) None of these

44 The centripetal force on an object moving in a circle does work when:

(a) The force is always perpendicular to instantaneous displacement
(b) The object is at rest
(c) The mass is zero
(d) None of these

45 In ideal uniform circular motion, the speed remains constant because the centripetal force:

(a) Acts along the direction of motion
(b) Acts opposite to the velocity
(c) Is perpendicular to instantaneous velocity
(d) None of these

46 If an object moving in a circle is released from its circular path, it initially moves along:

(a) A radial line towards the centre
(b) The tangent at the point of release
(c) A spiral towards the centre
(d) None of these

47 A satellite in a circular orbit is continuously falling towards Earth but:

(a) Has no gravitational force acting on it
(b) Has no velocity
(c) Continuously misses Earth’s surface because of its tangential motion
(d) None of these

48 The centripetal acceleration of an object is four times greater if its speed is doubled at constant radius. This is because acceleration is proportional to:

(a) Speed squared
(b) Speed only
(c) Radius squared
(d) None of these

49 A body moves with constant angular velocity in a circular path. Its angular acceleration is:

(a) Maximum
(b) Zero
(c) Infinite
(d) None of these

50 Which statement correctly describes uniform circular motion?

(a) Velocity remains constant in magnitude and direction
(b) Acceleration is always zero
(c) The object moves without any force
(d) None of these

Answer Key

1 (b) Circular path
2 (c) Changing direction of velocity
3 (a) Angular velocity
4 (d) None of these
5 (b) (2\pi) radians
6 (c) Period
7 (a) Frequency
8 (d) None of these
9 (b) (f=1/T)
10 (a) (v=r\omega)
11 (c) Tangential to the circular path
12 (b) Towards the centre
13 (a) Centripetal acceleration
14 (d) None of these
15 (b) (mv^2/r)
16 (c) Directed towards the centre
17 (a) Remains constant
18 (b) Direction of velocity changes
19 (c) Gravitational force
20 (a) Friction between tyres and road
21 (b) Tension in the string
22 (c) Four times
23 (a) Half
24 (b) Doubles
25 (c) 8 m/s²
26 (b) 16 N
27 (a) 2 Hz
28 (b) 0.5 second
29 (c) (2\pi\ rad/s)
30 (a) Outward apparent force
31 (b) Centripetal force
32 (a) Inertia
33 (c) Component of normal force towards centre
34 (b) Friction and radius
35 (a) Circular motion
36 (a) Right-hand rule
37 (c) 360°
38 (b) 1 Hz
39 (c) Outer edge
40 (a) Angular velocity
41 (b) Gravity
42 (c) Rotational motion and centrifugal effects
43 (a) Rapid rotation
44 (d) None of these
45 (c) Perpendicular to instantaneous velocity
46 (b) Tangent at the point of release
47 (c) Misses Earth’s surface due to tangential motion
48 (a) Speed squared
49 (b) Zero
50 (d) None of these

 

5 Views