Inertia, Friction and Equilibrium: 50 MCQs
1 Inertia is the tendency of an object to:
(a) Increase its speed automatically
(b) Resist changes in its state of rest or motion
(c) Change its mass
(d) None of these
2 The concept of inertia is closely associated with:
(a) Newton’s first law of motion
(b) Newton’s second law only
(c) Newton’s third law only
(d) None of these
3 The inertia of an object depends primarily on its:
(a) Colour
(b) Shape
(c) Mass
(d) None of these
4 An object with greater mass generally has:
(a) Less inertia
(b) Greater inertia
(c) Zero inertia
(d) None of these
5 When a moving bus suddenly stops, passengers tend to fall forward due to:
(a) Inertia of motion
(b) Inertia of rest
(c) Magnetic force
(d) None of these
6 When a stationary bus suddenly starts moving, passengers tend to fall backward due to:
(a) Inertia of motion
(b) Inertia of direction
(c) Inertia of rest
(d) None of these
7 Dust is removed from a carpet by beating it because of:
(a) Friction alone
(b) Inertia of rest
(c) Gravitational repulsion
(d) None of these
8 A passenger moving in a turning vehicle tends to move outward relative to the vehicle due to:
(a) Inertia of direction
(b) Inertia of rest
(c) Elasticity
(d) None of these
9 Friction is a force that:
(a) Always increases motion
(b) Opposes relative motion or the tendency of relative motion between surfaces
(c) Acts only in fluids
(d) None of these
10 The SI unit of frictional force is:
(a) Joule
(b) Pascal
(c) Newton
(d) None of these
11 Friction between two surfaces in contact is primarily influenced by:
(a) Their apparent colour
(b) The nature of surfaces and the normal force
(c) The surrounding sound level
(d) None of these
12 The force pressing two surfaces together perpendicularly is called:
(a) Normal force
(b) Magnetic force
(c) Buoyant force
(d) None of these
13 Static friction acts when two surfaces:
(a) Slide over each other
(b) Are completely separated
(c) Are at rest relative to each other but tend to move
(d) None of these
14 Kinetic friction acts when two surfaces:
(a) Are stationary relative to each other
(b) Slide relative to each other
(c) Are separated by a vacuum
(d) None of these
15 The maximum value of static friction just before sliding begins is called:
(a) Limiting friction
(b) Rolling friction
(c) Fluid resistance
(d) None of these
16 For dry surfaces, kinetic friction is generally:
(a) Greater than limiting static friction
(b) Always zero
(c) Equal to gravitational force
(d) None of these
17 The coefficient of friction is:
(a) Measured in newtons
(b) A dimensionless quantity
(c) Measured in joules
(d) None of these
18 The coefficient of friction is the ratio of frictional force to:
(a) Weight only
(b) Displacement
(c) Normal reaction
(d) None of these
19 Lubricants reduce friction by:
(a) Forming a separating layer between surfaces
(b) Increasing surface roughness
(c) Increasing the normal force
(d) None of these
20 Ball bearings are used in machines mainly to reduce:
(a) Static electricity
(b) Gravitational force
(c) Magnetic attraction
(d) None of these
21 Rolling friction is generally:
(a) Greater than sliding friction
(b) Less than sliding friction
(c) Equal to all other types of friction
(d) None of these
22 Air resistance is an example of:
(a) Fluid friction
(b) Static friction
(c) Limiting friction
(d) None of these
23 The frictional force acting on a stationary object may be:
(a) Always equal to its weight
(b) Always zero
(c) Less than or equal to the limiting static friction
(d) None of these
24 Friction is useful in:
(a) Walking
(b) Writing with a pencil
(c) Braking a vehicle
(d) None of these
25 An undesirable effect of friction is:
(a) Production of useful grip
(b) Wear and tear of machine parts
(c) Prevention of slipping
(d) None of these
26 Equilibrium of a body requires:
(a) Zero net force and zero net torque
(b) Maximum acceleration
(c) Constantly increasing momentum
(d) None of these
27 Translational equilibrium occurs when:
(a) Net torque is zero only
(b) Net force is zero
(c) Velocity must be zero
(d) None of these
28 Rotational equilibrium occurs when:
(a) Net force is maximum
(b) Angular velocity is zero
(c) Net torque is zero
(d) None of these
29 A body in static equilibrium is:
(a) At rest with zero net force and zero net torque
(b) Moving with increasing speed
(c) Rotating with increasing angular acceleration
(d) None of these
30 A body moving with constant velocity in a straight line is in:
(a) Dynamic equilibrium
(b) Unstable equilibrium
(c) Rotational acceleration
(d) None of these
31 The turning effect of a force is called:
(a) Momentum
(b) Torque
(c) Impulse
(d) None of these
32 Torque is calculated as the product of force and:
(a) Perpendicular distance from the pivot to the line of action of force
(b) Time of application
(c) Mass of the object
(d) None of these
33 The SI unit of torque is:
(a) Newton
(b) Joule per second
(c) Newton metre
(d) None of these
34 The principle of moments states that for rotational equilibrium:
(a) Clockwise moments equal anticlockwise moments
(b) All forces must act upward
(c) The body must have zero mass
(d) None of these
35 A longer spanner makes it easier to loosen a tight nut because it:
(a) Reduces the force of gravity
(b) Increases the moment arm
(c) Eliminates friction entirely
(d) None of these
36 The centre of gravity of a body is the point through which:
(a) Its entire weight may be considered to act
(b) Its entire mass disappears
(c) All external forces must pass
(d) None of these
37 A body is more stable when it has:
(a) A high centre of gravity and narrow base
(b) A high centre of gravity and small mass
(c) A low centre of gravity and wide base
(d) None of these
38 A freely suspended body comes to rest with its centre of gravity:
(a) Directly above the suspension point
(b) Directly below the suspension point
(c) At an arbitrary horizontal position
(d) None of these
39 A body is in stable equilibrium when a small displacement produces a tendency to:
(a) Return to its original position
(b) Move farther away from its original position
(c) Remain permanently displaced
(d) None of these
40 A body is in unstable equilibrium when a small displacement causes it to:
(a) Return to its original position
(b) Remain unchanged
(c) Move farther from its original position
(d) None of these
41 Neutral equilibrium occurs when a displaced body:
(a) Returns automatically to its original position
(b) Remains in its new position
(c) Moves continuously away
(d) None of these
42 A cone resting on its base is generally in:
(a) Stable equilibrium
(b) Unstable equilibrium
(c) Neutral equilibrium
(d) None of these
43 A ball resting at the bottom of a bowl is an example of:
(a) Unstable equilibrium
(b) Neutral equilibrium
(c) Dynamic equilibrium
(d) None of these
44 A ball resting on a horizontal flat surface is an ideal example of:
(a) Stable equilibrium
(b) Neutral equilibrium
(c) Unstable equilibrium
(d) None of these
45 The normal reaction on a horizontal surface for a stationary object with no other vertical forces is equal to:
(a) Its weight
(b) Its momentum
(c) Its kinetic energy
(d) None of these
46 If the coefficient of friction increases while normal force remains constant, the maximum static friction:
(a) Decreases
(b) Remains unchanged
(c) Becomes zero
(d) None of these
47 Friction between surfaces can be increased by:
(a) Applying suitable lubricants
(b) Increasing surface grip or roughness
(c) Using ball bearings
(d) None of these
48 The angle of friction is related to the coefficient of friction by:
(a) (\mu = \tan \theta)
(b) (\mu = \sin \theta)
(c) (\mu = \cos \theta)
(d) None of these
49 The angle of repose is the angle of inclination of a plane at which a body:
(a) Moves upward without force
(b) Becomes weightless
(c) Is just about to slide down
(d) None of these
50 The angle of repose is equal to the angle of friction for:
(a) All fluid surfaces
(b) The same pair of dry surfaces under the usual ideal friction model
(c) Perfectly frictionless surfaces
(d) None of these
Answer Key
1 (b) Resist changes in state of rest or motion
2 (a) Newton’s first law
3 (c) Mass
4 (b) Greater inertia
5 (a) Inertia of motion
6 (c) Inertia of rest
7 (b) Inertia of rest
8 (a) Inertia of direction
9 (b) Opposes relative motion or its tendency
10 (c) Newton
11 (b) Nature of surfaces and normal force
12 (a) Normal force
13 (c) At rest relative to each other but tending to move
14 (b) Slide relative to each other
15 (a) Limiting friction
16 (d) None of these
17 (b) Dimensionless quantity
18 (c) Normal reaction
19 (a) Separating layer between surfaces
20 (d) None of these
21 (b) Less than sliding friction
22 (a) Fluid friction
23 (c) Less than or equal to limiting static friction
24 (d) None of these
25 (b) Wear and tear
26 (a) Zero net force and zero net torque
27 (b) Net force is zero
28 (c) Net torque is zero
29 (a) At rest with zero net force and torque
30 (a) Dynamic equilibrium
31 (b) Torque
32 (a) Perpendicular distance from pivot to line of action
33 (c) Newton metre
34 (a) Clockwise moments equal anticlockwise moments
35 (b) Increases the moment arm
36 (a) Point through which its weight acts
37 (c) Low centre of gravity and wide base
38 (b) Directly below suspension point
39 (a) Return to original position
40 (c) Move farther from original position
41 (b) Remains in its new position
42 (a) Stable equilibrium
43 (a) Stable equilibrium
44 (b) Neutral equilibrium
45 (a) Its weight
46 (d) None of these
47 (b) Increasing surface grip or roughness
48 (a) (\mu = \tan \theta)
49 (c) Just about to slide down
50 (b) Same pair of dry surfaces under the ideal model