General Science – Physics – Magnetism and Magnetic Fields

Magnetism and Magnetic Fields

1. Introduction

Magnetism is a physical phenomenon associated with magnetic fields and the forces they exert on certain materials, electric currents and moving electric charges.

Magnetic effects are observed in permanent magnets, electric motors, generators, transformers, speakers, magnetic storage devices and many other technologies.

Magnetism is closely related to electricity. Electric currents produce magnetic fields, and changing magnetic fields can induce electrical voltages. These relationships form the foundation of electromagnetism.

2. What Is Magnetism?

Magnetism is the phenomenon through which magnetic fields produce attractive or repulsive forces.

A magnet is an object that produces a magnetic field and can attract certain magnetic materials, particularly iron, nickel and cobalt.

Magnets are generally classified into two broad categories:

  1. Permanent magnets
  2. Temporary magnets

Permanent magnets retain their magnetism for a relatively long period, while temporary magnets become magnetized under suitable conditions and may lose much of their magnetism when the magnetizing influence is removed.

3. Magnetic Poles

Every ordinary bar magnet has two magnetic poles:

  • North pole
  • South pole

The north pole is the end that points approximately towards geographic north when the magnet is freely suspended.

The south pole points approximately towards geographic south.

3.1 Law of Magnetic Poles

The basic law of magnetic poles states:

  • Like poles repel each other.
  • Unlike poles attract each other.

Therefore:

  • North repels north.
  • South repels south.
  • North attracts south.

3.2 Magnetic Poles Always Occur in Pairs

Ordinary magnets have both north and south poles.

If a bar magnet is broken into smaller pieces, each piece develops its own north and south poles.

It does not produce an isolated north or south pole.

Magnetic monopoles have not been experimentally established as isolated particles in ordinary magnetism.

4. Magnetic Field

A magnetic field is the region around a magnet, current-carrying conductor or moving electric charge where magnetic forces can be experienced.

Magnetic fields are represented by the symbol:

[
\mathbf{B}
]

The SI unit of magnetic field strength in terms of magnetic flux density is the tesla (T).

[
1,T=1,Wb/m^2
]

Where Wb represents weber, the SI unit of magnetic flux.

Magnetic fields have both magnitude and direction, making magnetic flux density a vector quantity.

5. Magnetic Field Lines

Magnetic field lines are imaginary lines used to represent the direction and relative strength of a magnetic field.

5.1 Properties of Magnetic Field Lines

Important properties include:

  1. Outside a bar magnet, field lines travel from north to south.
  2. Inside a bar magnet, they travel from south to north.
  3. Magnetic field lines form continuous closed loops.
  4. They never intersect one another.
  5. Closely spaced lines indicate a stronger magnetic field.
  6. Widely spaced lines indicate a weaker magnetic field.
  7. The tangent to a field line indicates the magnetic field direction at that point.

5.2 Magnetic Field Around a Bar Magnet

A bar magnet produces a magnetic field extending through the surrounding space.

The field is generally strongest near its poles because the field lines are more concentrated in these regions.

The magnetic field becomes weaker as the distance from the magnet increases.

6. Magnetic Field of the Earth

The Earth behaves approximately like a giant magnetic dipole.

Its magnetic field extends around the planet and helps protect the Earth from many charged particles carried by the solar wind.

A magnetic compass aligns itself approximately along the local horizontal component of the Earth’s magnetic field.

6.1 Geographic and Magnetic Poles

Geographic poles are defined by the Earth’s rotational axis.

Magnetic poles are associated with the Earth’s magnetic field.

These are not located at exactly the same positions.

The direction indicated by a compass therefore does not always correspond precisely to geographic north.

6.2 Magnetic Declination

Magnetic declination is the angle between geographic north and magnetic north at a particular location.

It varies with geographical position and changes over time.

6.3 Magnetic Inclination

Magnetic inclination, also called magnetic dip, is the angle made by the Earth’s magnetic field with the horizontal plane.

It varies with location and is approximately zero near the magnetic equator and approaches a large angle near the magnetic poles.

7. Magnetic Flux

Magnetic flux measures the amount of magnetic field passing through a specified surface.

It is represented by:

[
\Phi_B
]

For a uniform magnetic field passing through a flat surface:

[
\boxed{\Phi_B=BA\cos\theta}
]

Where:

  • (\Phi_B) = magnetic flux
  • (B) = magnetic flux density
  • (A) = surface area
  • (\theta) = angle between the magnetic field and the normal to the surface

The SI unit of magnetic flux is the weber (Wb).

[
1,Wb=1,T,m^2
]

7.1 Maximum and Minimum Magnetic Flux

When the magnetic field is perpendicular to the surface, it is parallel to the surface normal.

Therefore:

[
\theta=0^\circ
]

[
\Phi_B=BA
]

This gives maximum positive flux.

When the magnetic field is parallel to the surface, it is perpendicular to the surface normal.

Therefore:

[
\theta=90^\circ
]

[
\Phi_B=0
]

Thus, magnetic flux depends on the field strength, surface area and orientation of the surface.

8. Magnetic Materials

Materials respond differently when placed in a magnetic field.

They are commonly classified as:

  1. Ferromagnetic materials
  2. Paramagnetic materials
  3. Diamagnetic materials

8.1 Ferromagnetic Materials

Ferromagnetic materials are strongly attracted by magnetic fields and can retain significant magnetization.

Examples include:

  • Iron
  • Nickel
  • Cobalt
  • Certain alloys

Their magnetic behaviour is associated with the alignment of microscopic magnetic domains.

Ferromagnetic materials are widely used in permanent magnets, transformer cores, motors and magnetic storage.

8.2 Paramagnetic Materials

Paramagnetic materials are weakly attracted by an external magnetic field.

Their magnetization generally disappears when the external field is removed.

Examples include:

  • Aluminium
  • Platinum
  • Magnesium

8.3 Diamagnetic Materials

Diamagnetic materials are weakly repelled by an external magnetic field.

Their induced magnetization acts in opposition to the applied field.

Examples include:

  • Copper
  • Gold
  • Silver
  • Bismuth
  • Water

The diamagnetic effect is generally weak in ordinary materials.

8.4 Comparison of Magnetic Materials

Property Ferromagnetic Paramagnetic Diamagnetic
Response to external field Strong attraction Weak attraction Weak repulsion
Magnetization Strong Weak Opposes applied field
Retains magnetism Some can retain it Generally no Generally no
Examples Iron, nickel, cobalt Aluminium, platinum Copper, bismuth, water

9. Magnetic Domains

A magnetic domain is a small region within a ferromagnetic material in which many atomic magnetic moments are aligned in a similar direction.

In an unmagnetized ferromagnetic material, different domains may point in different directions.

Their magnetic effects largely cancel one another.

When an external magnetic field is applied, domains can grow or rotate towards the field direction.

This produces a net magnetization.

9.1 Permanent and Temporary Magnetism

A material that retains substantial magnetization after the external magnetic field is removed can be used as a permanent magnet.

Soft magnetic materials are easier to magnetize and demagnetize, making them useful for electromagnets and transformer cores.

Hard magnetic materials generally resist demagnetization and are suitable for permanent magnets.

10. Magnetic Field Produced by an Electric Current

An electric current produces a magnetic field around its conductor.

This relationship was demonstrated experimentally by Hans Christian Ørsted.

10.1 Magnetic Field Around a Straight Conductor

A straight current-carrying wire produces circular magnetic field lines around it.

For a long straight conductor in a uniform medium, the magnetic field at distance (r) is:

[
\boxed{B=\frac{\mu I}{2\pi r}}
]

Where:

  • (B) = magnetic flux density
  • (\mu) = permeability of the medium
  • (I) = current
  • (r) = perpendicular distance from the conductor

In free space:

[
\mu=\mu_0
]

Where:

[
\mu_0=4\pi\times10^{-7},H/m
]

This relationship shows that:

  • Magnetic field strength increases with current.
  • Magnetic field strength decreases with distance from the wire.

10.2 Right-Hand Grip Rule

The right-hand grip rule determines the direction of the magnetic field around a straight current-carrying conductor.

If the right thumb points in the direction of conventional current, the curled fingers indicate the direction of the magnetic field.

This rule is also useful for determining the field direction around a solenoid.

11. Magnetic Field of a Circular Coil

A current flowing through a circular coil produces a magnetic field.

The field at the centre of a single circular loop of radius (R) in a uniform medium is:

[
\boxed{B=\frac{\mu I}{2R}}
]

For a coil of (N) closely wound turns:

[
\boxed{B=\frac{\mu NI}{2R}}
]

This shows that the magnetic field increases with the current and the number of turns.

Circular coils are used in electromagnets, motors and electromagnetic devices.

12. Magnetic Field of a Solenoid

A solenoid is a long cylindrical coil consisting of many turns of insulated wire.

When electric current flows through it, a magnetic field is produced.

For an ideal long solenoid:

[
\boxed{B=\mu nI}
]

Where:

  • (B) = magnetic flux density inside the solenoid
  • (\mu) = permeability of the medium
  • (n) = number of turns per unit length
  • (I) = current

For a linear magnetic material:

[
\mu=\mu_0\mu_r
]

Where (\mu_r) is relative permeability.

The magnetic field inside a long ideal solenoid is approximately uniform, while the field outside is relatively weak.

13. Magnetic Force on a Moving Charge

A moving electric charge experiences a force when it moves through a magnetic field.

The magnitude of the magnetic force is:

[
\boxed{F=|q|vB\sin\theta}
]

Where:

  • (F) = magnetic force
  • (q) = electric charge
  • (v) = velocity of the charge
  • (B) = magnetic flux density
  • (\theta) = angle between velocity and magnetic field

13.1 Important Cases

When the charge moves parallel to the magnetic field:

[
\theta=0^\circ
]

[
F=0
]

When the charge moves perpendicular to the magnetic field:

[
\theta=90^\circ
]

[
F=|q|vB
]

The magnetic force is maximum.

The direction of force is perpendicular to both the velocity and magnetic field directions.

For a positive charge, the direction follows the right-hand rule. For a negative charge, the direction is opposite.

14. Magnetic Force on a Current-Carrying Conductor

A current-carrying conductor placed in a magnetic field experiences a force.

The magnitude of the force is:

[
\boxed{F=BIL\sin\theta}
]

Where:

  • (F) = magnetic force
  • (B) = magnetic flux density
  • (I) = current
  • (L) = length of conductor within the magnetic field
  • (\theta) = angle between current direction and magnetic field

When the conductor is perpendicular to the magnetic field:

[
F=BIL
]

This principle is used in electric motors and many electromagnetic devices.

15. Magnetic Force and Motion of Charged Particles

When a charged particle moves perpendicular to a uniform magnetic field, the magnetic force acts as a centripetal force.

Therefore:

[
|q|vB=\frac{mv^2}{r}
]

Rearranging:

[
\boxed{r=\frac{mv}{|q|B}}
]

Where:

  • (m) = mass of the particle
  • (v) = speed of the particle
  • (q) = electric charge
  • (B) = magnetic flux density
  • (r) = radius of the circular path

The magnetic force changes the direction of motion but does not change the speed of the particle when the magnetic field is static and acts alone.

This principle is used in particle accelerators and mass spectrometers.

16. Applications of Magnetism

16.1 Magnetic Compass

A compass uses a small magnetized needle that aligns with the Earth’s magnetic field.

16.2 Electric Motors

Electric motors use magnetic forces to convert electrical energy into mechanical energy.

16.3 Electric Generators

Generators use electromagnetic induction to convert mechanical energy into electrical energy.

16.4 Transformers

Transformers use changing magnetic fields to transfer electrical energy between coils.

16.5 Loudspeakers

Loudspeakers use magnetic forces to move a diaphragm and produce sound waves.

16.6 Magnetic Resonance Imaging

Magnetic resonance imaging (MRI) uses strong magnetic fields and radio-frequency signals to produce detailed images of internal body structures.

16.7 Magnetic Data Storage

Magnetic materials are used in certain storage devices to represent digital information.

16.8 Magnetic Separation

Magnetic separation is used in industries to separate magnetic materials from non-magnetic substances.

17. Worked Numerical Problems

Problem 1: Magnetic Flux

A magnetic field of 0.5 T passes perpendicularly through a surface of area 0.2 m². Calculate the magnetic flux.

Solution

[
\Phi_B=BA\cos\theta
]

Since the field is perpendicular to the surface:

[
\theta=0^\circ
]

[
\Phi_B=0.5\times0.2
]

[
\boxed{\Phi_B=0.1,Wb}
]

Problem 2: Magnetic Force on a Moving Charge

A charge of (2\times10^{-6},C) moves at (3\times10^5,m/s) perpendicular to a magnetic field of 0.4 T. Calculate the magnetic force.

Solution

[
F=|q|vB\sin\theta
]

Since the motion is perpendicular:

[
\theta=90^\circ
]

[
F=2\times10^{-6}\times3\times10^5\times0.4
]

[
\boxed{F=0.24,N}
]

Problem 3: Force on a Current-Carrying Wire

A wire of length 0.5 m carries a current of 4 A in a magnetic field of 0.3 T. The wire is perpendicular to the field. Calculate the force.

Solution

[
F=BIL
]

[
F=0.3\times4\times0.5
]

[
\boxed{F=0.6,N}
]

Problem 4: Magnetic Field Around a Straight Wire

A long straight conductor carries a current of 10 A. Calculate the magnetic field at a distance of 0.1 m from the conductor in free space.

Solution

[
B=\frac{\mu_0 I}{2\pi r}
]

[
B=\frac{4\pi\times10^{-7}\times10}{2\pi\times0.1}
]

[
\boxed{B=2\times10^{-5},T}
]

Problem 5: Magnetic Field Inside a Solenoid

An ideal long air-core solenoid has 1,000 turns per metre and carries a current of 2 A. Calculate the magnetic field inside it.

Solution

[
B=\mu_0 nI
]

[
B=4\pi\times10^{-7}\times1000\times2
]

[
B=8\pi\times10^{-4},T
]

[
\boxed{B\approx2.51\times10^{-3},T}
]

18. Common Examination Distinctions

Concept Meaning
Magnetism Phenomenon involving magnetic fields and forces
Magnetic field Region where magnetic forces can act
Magnetic flux density Magnetic field quantity represented by (B)
Tesla SI unit of magnetic flux density
Weber SI unit of magnetic flux
Magnetic flux Measure of magnetic field passing through a surface
Ferromagnetic Strongly attracted by magnetic fields
Paramagnetic Weakly attracted by magnetic fields
Diamagnetic Weakly repelled by magnetic fields
Magnetic domain Region of aligned magnetic moments in a ferromagnetic material
Solenoid Coil of wire producing a magnetic field when current flows
Magnetic inclination Angle of Earth’s magnetic field with the horizontal
Magnetic declination Angle between geographic north and magnetic north

19. 36 Key Takeaways for Exams

  1. Magnetism is associated with magnetic fields and magnetic forces.
  2. A magnet has north and south poles.
  3. Like magnetic poles repel each other.
  4. Unlike magnetic poles attract each other.
  5. Ordinary magnets always have both north and south poles.
  6. Breaking a bar magnet produces smaller magnets with two poles each.
  7. Isolated magnetic monopoles have not been experimentally established.
  8. A magnetic field is represented by the symbol (B).
  9. The SI unit of magnetic flux density is the tesla.
  10. The SI unit of magnetic flux is the weber.
  11. Outside a bar magnet, magnetic field lines travel from north to south.
  12. Inside a magnet, magnetic field lines travel from south to north.
  13. Magnetic field lines form continuous closed loops.
  14. Magnetic field lines never intersect.
  15. Closely spaced magnetic field lines indicate a stronger field.
  16. The Earth behaves approximately like a giant magnetic dipole.
  17. A magnetic compass aligns approximately with the Earth’s local magnetic field.
  18. Magnetic declination is the angle between geographic north and magnetic north.
  19. Magnetic inclination is the angle between the Earth’s magnetic field and the horizontal.
  20. Ferromagnetic materials include iron, nickel and cobalt.
  21. Paramagnetic materials are weakly attracted by magnetic fields.
  22. Diamagnetic materials are weakly repelled by magnetic fields.
  23. Magnetic domains are regions of aligned magnetic moments in ferromagnetic materials.
  24. An electric current produces a magnetic field around its conductor.
  25. The right-hand grip rule determines the magnetic field direction around a current-carrying conductor.
  26. Magnetic flux is calculated using (\Phi_B=BA\cos\theta).
  27. The angle in the magnetic flux equation is measured from the surface normal.
  28. A long straight current-carrying conductor produces circular magnetic field lines.
  29. The magnetic field around a long straight conductor increases with current.
  30. The magnetic field around a long straight conductor decreases with distance.
  31. A solenoid produces a magnetic field similar to that of a bar magnet.
  32. The magnetic field inside an ideal long solenoid is (B=\mu nI).
  33. A moving electric charge experiences magnetic force in a magnetic field.
  34. Magnetic force on a moving charge is (F=|q|vB\sin\theta).
  35. The force on a current-carrying conductor is (F=BIL\sin\theta).
  36. Magnetism is essential in motors, generators, transformers, MRI systems and magnetic storage technologies.
4 Views