MCQs – Physics – Simple Machines, Mechanical Advantage and Efficiency

Simple Machines, Mechanical Advantage and Efficiency: 50 MCQs

1 A machine is a device that helps us to:

(a) Create energy
(b) Make work easier or more convenient
(c) Eliminate all forces
(d) None of these

2 Which of the following is a simple machine?

(a) Lever
(b) Electric computer
(c) Television
(d) None of these

3 The six classical types of simple machines include lever, pulley, wheel and axle, inclined plane, wedge and:

(a) Electric motor
(b) Generator
(c) Screw
(d) None of these

4 A lever is a rigid bar that rotates around a fixed point called:

(a) Load
(b) Effort
(c) Resistance
(d) None of these

5 The fixed point around which a lever rotates is called:

(a) Fulcrum
(b) Load
(c) Effort
(d) None of these

6 The force applied to a machine to overcome a load is called:

(a) Resistance
(b) Effort
(c) Friction
(d) None of these

7 The object or force that a machine is intended to move or overcome is called:

(a) Fulcrum
(b) Effort
(c) Load
(d) None of these

8 A lever in which the fulcrum lies between the effort and the load is classified as:

(a) First-class lever
(b) Second-class lever
(c) Third-class lever
(d) None of these

9 A seesaw is an example of:

(a) Second-class lever
(b) First-class lever
(c) Third-class lever
(d) None of these

10 A wheelbarrow is an example of:

(a) First-class lever
(b) Third-class lever
(c) Second-class lever
(d) None of these

11 In a second-class lever, the load is positioned between:

(a) Fulcrum and effort
(b) Two fulcrums
(c) Two loads
(d) None of these

12 A pair of tweezers is an example of:

(a) First-class lever
(b) Third-class lever
(c) Second-class lever
(d) None of these

13 In a third-class lever, the effort is positioned between:

(a) Two fulcrums
(b) Two loads
(c) Fulcrum and load
(d) None of these

14 Human forearm lifting an object using the biceps is an example of:

(a) First-class lever
(b) Second-class lever
(c) Third-class lever
(d) None of these

15 A pulley is primarily used to:

(a) Change the direction of force or provide mechanical advantage
(b) Generate electrical energy
(c) Reduce the mass of an object
(d) None of these

16 A fixed pulley ideally provides a mechanical advantage of:

(a) 2
(b) 3
(c) 4
(d) None of these

17 A single movable pulley ideally provides a mechanical advantage of:

(a) 1
(b) 2
(c) 4
(d) None of these

18 A combination of fixed and movable pulleys is called:

(a) Wedge
(b) Inclined plane
(c) Block and tackle
(d) None of these

19 The mechanical advantage of an ideal pulley system depends on:

(a) The number of supporting rope segments
(b) The colour of the pulley
(c) The temperature of the load
(d) None of these

20 An inclined plane helps to move a heavy load by:

(a) Increasing its weight
(b) Reducing the force required over a longer distance
(c) Eliminating gravitational force
(d) None of these

21 A ramp is an example of:

(a) Lever
(b) Pulley
(c) Inclined plane
(d) None of these

22 A wedge is commonly used for:

(a) Cutting or splitting materials
(b) Generating electricity
(c) Measuring temperature
(d) None of these

23 An axe is an example of:

(a) Wheel and axle
(b) Wedge
(c) Pulley
(d) None of these

24 A screw can be considered a modified form of:

(a) Lever
(b) Pulley
(c) Wheel and axle
(d) None of these

25 The threads of a screw are essentially:

(a) An inclined plane wrapped around a cylinder
(b) A series of levers
(c) A set of pulleys
(d) None of these

26 A steering wheel is an example of:

(a) Wedge
(b) Wheel and axle
(c) Inclined plane
(d) None of these

27 The mechanical advantage of a machine is the ratio of:

(a) Effort to load
(b) Distance to time
(c) Power to energy
(d) None of these

28 The formula for mechanical advantage is:

(a) Load / Effort
(b) Effort / Load
(c) Load × Effort
(d) None of these

29 If a machine lifts a load of 200 N using an effort of 50 N, its mechanical advantage is:

(a) 2
(b) 4
(c) 5
(d) None of these

30 A machine has a mechanical advantage of 5 and an effort of 20 N. The load lifted is:

(a) 4 N
(b) 25 N
(c) 100 N
(d) None of these

31 The velocity ratio of a machine is the ratio of:

(a) Load to effort
(b) Output work to input work
(c) Power output to power input
(d) None of these

32 The velocity ratio is calculated as:

(a) Distance moved by effort / Distance moved by load
(b) Distance moved by load / Distance moved by effort
(c) Load / Effort
(d) None of these

33 The efficiency of a machine is calculated by:

(a) Mechanical advantage × velocity ratio
(b) Velocity ratio / mechanical advantage
(c) Mechanical advantage / velocity ratio × 100%
(d) None of these

34 The efficiency of an ideal machine is:

(a) 50%
(b) 75%
(c) 90%
(d) None of these

35 The efficiency of a real machine is generally less than 100% because of:

(a) Energy losses, including friction
(b) Creation of additional energy
(c) Absence of all resistance
(d) None of these

36 A machine has mechanical advantage 4 and velocity ratio 5. Its efficiency is:

(a) 40%
(b) 80%
(c) 125%
(d) None of these

37 If the useful output work is 300 J and the input work is 500 J, efficiency is:

(a) 30%
(b) 50%
(c) 60%
(d) None of these

38 A machine with mechanical advantage greater than 1:

(a) Multiplies the applied force
(b) Always increases speed
(c) Produces more energy than it receives
(d) None of these

39 A machine with mechanical advantage less than 1 may be useful because it:

(a) Creates energy
(b) Increases the distance or speed of movement of the load
(c) Eliminates the need for effort
(d) None of these

40 A machine that changes only the direction of an applied force, without increasing its magnitude, has an ideal mechanical advantage of:

(a) 2
(b) 5
(c) 10
(d) None of these

41 The mechanical advantage of an ideal first-class lever is determined by:

(a) The ratio of effort arm to load arm
(b) The temperature of the lever
(c) The mass of the fulcrum
(d) None of these

42 According to the principle of moments, a lever is in rotational equilibrium when:

(a) Effort is always greater than load
(b) Clockwise moment equals anticlockwise moment
(c) The fulcrum moves continuously
(d) None of these

43 A longer effort arm in a lever generally:

(a) Reduces the effort required for a given load
(b) Increases the load’s mass
(c) Eliminates the load
(d) None of these

44 The mechanical advantage of an ideal inclined plane is:

(a) Length of inclined plane / vertical height
(b) Vertical height / length of inclined plane
(c) Load multiplied by effort
(d) None of these

45 An inclined plane is 4 metres long and 1 metre high. Its ideal mechanical advantage is:

(a) 1
(b) 2
(c) 4
(d) None of these

46 A machine receives 1,000 J of energy and delivers 700 J of useful work. The energy lost is:

(a) 100 J
(b) 300 J
(c) 700 J
(d) None of these

47 Which of the following is a compound machine?

(a) A single fixed pulley
(b) A simple wedge
(c) A bicycle
(d) None of these

48 A pair of scissors combines the principles of:

(a) Levers and wedges
(b) Inclined planes and pulleys only
(c) Wheel and axle only
(d) None of these

49 The main purpose of using gears in mechanical systems is to:

(a) Eliminate all friction
(b) Create energy
(c) Change speed, torque or direction of rotation
(d) None of these

50 Which statement about simple machines is correct?

(a) They create energy from nothing
(b) They can change the magnitude or direction of an applied force
(c) They always have 100% efficiency in practical use
(d) None of these

Answer Key

1 (b) Make work easier or more convenient
2 (a) Lever
3 (c) Screw
4 (d) None of these
5 (a) Fulcrum
6 (b) Effort
7 (c) Load
8 (a) First-class lever
9 (b) First-class lever
10 (c) Second-class lever
11 (a) Fulcrum and effort
12 (b) Third-class lever
13 (c) Fulcrum and load
14 (c) Third-class lever
15 (a) Change direction of force or provide mechanical advantage
16 (d) None of these
17 (b) 2
18 (c) Block and tackle
19 (a) Number of supporting rope segments
20 (b) Reducing force over a longer distance
21 (c) Inclined plane
22 (a) Cutting or splitting materials
23 (b) Wedge
24 (d) None of these
25 (a) Inclined plane wrapped around a cylinder
26 (b) Wheel and axle
27 (d) None of these
28 (a) Load / Effort
29 (b) 4
30 (c) 100 N
31 (d) None of these
32 (a) Distance moved by effort / Distance moved by load
33 (c) Mechanical advantage / velocity ratio × 100%
34 (d) None of these
35 (a) Energy losses, including friction
36 (b) 80%
37 (c) 60%
38 (a) Multiplies the applied force
39 (b) Increases distance or speed of load movement
40 (d) None of these
41 (a) Ratio of effort arm to load arm
42 (b) Clockwise moment equals anticlockwise moment
43 (a) Reduces effort required
44 (a) Length / vertical height
45 (c) 4
46 (b) 300 J
47 (c) Bicycle
48 (a) Levers and wedges
49 (c) Change speed, torque or direction of rotation
50 (b) Change magnitude or direction of applied force

 

6 Views