Surface Tension, Viscosity and Fluid Flow: 50 MCQs
1 Surface tension is a property of liquids that causes their free surface to:
(a) Expand without limit
(b) Behave like a stretched elastic membrane
(c) Become perfectly rigid
(d) None of these
2 Surface tension arises primarily due to:
(a) Cohesive forces between liquid molecules
(b) Gravitational force alone
(c) Magnetic attraction
(d) None of these
3 The SI unit of surface tension is:
(a) Pascal
(b) Newton
(c) Newton per metre
(d) None of these
4 Surface tension can be defined as force per unit:
(a) Volume
(b) Length
(c) Mass
(d) None of these
5 Surface tension is also numerically equal to surface energy per unit:
(a) Area
(b) Volume
(c) Mass
(d) None of these
6 The surface of a liquid tends to minimise its:
(a) Density
(b) Temperature
(c) Surface area
(d) None of these
7 Small liquid droplets tend to become spherical because:
(a) Gravity is absent
(b) Surface tension tends to minimise surface area
(c) Their density becomes zero
(d) None of these
8 A needle may float on water when carefully placed because of:
(a) Surface tension
(b) Magnetic force
(c) Atmospheric electricity
(d) None of these
9 Insects such as water striders can move on water mainly due to:
(a) Viscosity
(b) Buoyancy alone
(c) Surface tension
(d) None of these
10 The surface tension of most liquids generally decreases when:
(a) Pressure becomes zero
(b) Temperature increases
(c) The container becomes wider
(d) None of these
11 At the critical temperature of a pure substance, the distinction between liquid and gas phases disappears and surface tension:
(a) Becomes infinite
(b) Doubles
(c) Becomes zero
(d) None of these
12 Soap reduces the surface tension of water because it acts as a:
(a) Surfactant
(b) Magnetic substance
(c) Solidifying agent
(d) None of these
13 Detergents improve cleaning partly because they:
(a) Increase water’s surface tension
(b) Reduce surface tension and improve wetting
(c) Convert water into a gas
(d) None of these
14 The tendency of a liquid to spread over a solid surface is associated with:
(a) Nuclear attraction
(b) Electrical resistance
(c) Wetting
(d) None of these
15 Capillary action is the rise or fall of a liquid in a narrow tube due to:
(a) Surface tension and adhesive and cohesive forces
(b) Atmospheric temperature alone
(c) Magnetic attraction
(d) None of these
16 Water rises in a clean, narrow glass capillary because:
(a) Cohesion is always greater than adhesion
(b) Adhesion between water and glass is sufficiently strong
(c) Gravity is absent
(d) None of these
17 Mercury is depressed in a glass capillary because:
(a) Adhesion to glass is greater than cohesion
(b) Mercury has no surface tension
(c) Cohesion within mercury exceeds adhesion to glass
(d) None of these
18 The meniscus of water in a clean glass tube is generally:
(a) Concave
(b) Convex
(c) Perfectly flat in every case
(d) None of these
19 The meniscus of mercury in a clean glass tube is generally:
(a) Concave
(b) Convex
(c) Completely absent
(d) None of these
20 Capillary action is important in plants because it contributes to:
(a) Nuclear respiration
(b) Production of sunlight
(c) Movement of water through narrow spaces in plant tissues
(d) None of these
21 Viscosity is the property of a fluid that describes its:
(a) Resistance to flow
(b) Ability to conduct electricity
(c) Colour
(d) None of these
22 The SI unit of dynamic viscosity is:
(a) Newton per metre
(b) Pascal-second
(c) Joule per kilogram
(d) None of these
23 The dimensional unit of dynamic viscosity in SI base units is:
(a) kg m/s
(b) kg/m³
(c) kg/(m·s)
(d) None of these
24 A fluid with high viscosity:
(a) Flows more easily
(b) Offers greater resistance to flow
(c) Has no internal friction
(d) None of these
25 Which of the following generally has greater viscosity at room temperature?
(a) Honey
(b) Water
(c) Air
(d) None of these
26 The viscosity of most liquids generally:
(a) Increases with temperature
(b) Remains exactly constant
(c) Decreases with temperature
(d) None of these
27 The viscosity of most gases generally:
(a) Decreases as temperature rises
(b) Increases as temperature rises
(c) Becomes zero at room temperature
(d) None of these
28 The internal friction between adjacent layers of a moving fluid is associated with:
(a) Surface tension
(b) Buoyancy
(c) Viscosity
(d) None of these
29 Newton’s law of viscosity relates shear stress to:
(a) Velocity gradient
(b) Liquid colour
(c) Atmospheric pressure alone
(d) None of these
30 The velocity gradient in a fluid is the rate of change of velocity with respect to:
(a) Time only
(b) Distance perpendicular to the flow
(c) Mass
(d) None of these
31 A fluid that has zero viscosity is described as:
(a) Ideal fluid
(b) Real fluid
(c) Compressible solid
(d) None of these
32 An ideal fluid is generally assumed to be:
(a) Highly viscous
(b) Electrically charged
(c) Incompressible and non-viscous
(d) None of these
33 Laminar flow is characterised by:
(a) Irregular mixing of fluid layers
(b) Smooth motion in orderly layers
(c) Complete absence of velocity
(d) None of these
34 Turbulent flow involves:
(a) Random fluctuations and eddies
(b) Perfectly smooth parallel layers
(c) No transfer of momentum
(d) None of these
35 The dimensionless quantity used to predict the nature of fluid flow is:
(a) Mach number only
(b) Froude number only
(c) Reynolds number
(d) None of these
36 Reynolds number depends on:
(a) Fluid density, flow speed, characteristic length and viscosity
(b) Fluid colour and container material
(c) Temperature alone
(d) None of these
37 For flow through a circular pipe, Reynolds number is commonly calculated using:
(a) Pipe radius divided by speed
(b) Density multiplied by velocity and pipe diameter, divided by dynamic viscosity
(c) Viscosity divided by pressure only
(d) None of these
38 In a pipe, laminar flow is generally favoured by:
(a) High speed and low viscosity
(b) Large Reynolds number
(c) Low Reynolds number
(d) None of these
39 The critical Reynolds number for flow in a circular pipe is commonly taken to be approximately:
(a) 2,300
(b) 23
(c) 230,000
(d) None of these
40 The flow of a viscous fluid through a narrow tube under suitable laminar conditions is described by:
(a) Boyle’s law
(b) Poiseuille’s law
(c) Charles’s law
(d) None of these
41 According to Poiseuille’s law, for laminar flow through a cylindrical tube, the volume flow rate is proportional to:
(a) The square of the tube radius
(b) The cube of the tube radius
(c) The fourth power of the tube radius
(d) None of these
42 The volume flow rate of a fluid is defined as:
(a) Volume flowing per unit time
(b) Mass per unit area
(c) Force per unit volume
(d) None of these
43 The SI unit of volume flow rate is:
(a) m/s
(b) m³/s
(c) kg/m³
(d) None of these
44 The continuity equation expresses conservation of:
(a) Energy only
(b) Temperature
(c) Mass
(d) None of these
45 In steady flow of an incompressible fluid through a pipe, the product of cross-sectional area and fluid speed is:
(a) Constant
(b) Always zero
(c) Equal to pressure
(d) None of these
46 According to Bernoulli’s principle, an increase in fluid speed along a streamline is generally associated with:
(a) An increase in static pressure
(b) A decrease in static pressure
(c) Infinite static pressure
(d) None of these
47 A perfume atomiser works partly on the principle that fast-moving air can create:
(a) A region of reduced pressure
(b) A region of infinite pressure
(c) Zero gravitational acceleration
(d) None of these
48 The drag force on an object moving through a fluid is a force that generally:
(a) Acts in the direction of relative motion
(b) Acts perpendicular to all motion
(c) Opposes relative motion
(d) None of these
49 Terminal velocity is reached when:
(a) The net force on a falling object becomes zero
(b) Gravity becomes zero
(c) The object stops having mass
(d) None of these
50 A raindrop falling at terminal velocity experiences:
(a) Gravitational force greater than all opposing forces
(b) Balanced downward weight and upward resistive forces
(c) No gravitational force
(d) None of these
Answer Key
1 (b) Stretched elastic membrane
2 (a) Cohesive forces between liquid molecules
3 (c) Newton per metre
4 (b) Length
5 (a) Area
6 (c) Surface area
7 (b) Surface tension minimises surface area
8 (a) Surface tension
9 (c) Surface tension
10 (b) Temperature increases
11 (c) Becomes zero
12 (a) Surfactant
13 (b) Reduces surface tension and improves wetting
14 (c) Wetting
15 (a) Surface tension and adhesive and cohesive forces
16 (b) Adhesion between water and glass
17 (c) Cohesion exceeds adhesion
18 (a) Concave
19 (b) Convex
20 (c) Movement of water through narrow spaces
21 (a) Resistance to flow
22 (b) Pascal-second
23 (c) kg/(m·s)
24 (b) Greater resistance to flow
25 (a) Honey
26 (c) Decreases with temperature
27 (b) Increases with temperature
28 (c) Viscosity
29 (a) Velocity gradient
30 (b) Distance perpendicular to flow
31 (a) Ideal fluid
32 (c) Incompressible and non-viscous
33 (b) Smooth, orderly layers
34 (a) Random fluctuations and eddies
35 (c) Reynolds number
36 (a) Density, speed, length and viscosity
37 (b) Density × velocity × diameter / dynamic viscosity
38 (c) Low Reynolds number
39 (a) 2,300
40 (b) Poiseuille’s law
41 (c) Fourth power of tube radius
42 (a) Volume per unit time
43 (b) m³/s
44 (c) Mass
45 (a) Constant
46 (b) Decrease in static pressure
47 (a) Region of reduced pressure
48 (c) Opposes relative motion
49 (a) Net force becomes zero
50 (b) Downward weight and upward resistance are balanced