General Science – Physics – Alternating Current and Direct Current

Alternating Current and Direct Current

1. Introduction

Electric current is the rate of flow of electric charge through a conductor.

Depending on the direction and behaviour of charge flow, electric current is commonly classified into two major types:

  1. Direct current (DC)
  2. Alternating current (AC)

Direct current flows in one direction, while alternating current periodically changes direction.

Both types are essential in electrical engineering, electronics, communication systems, power generation and everyday appliances.

2. Direct Current (DC)

Direct current is electric current that flows in one direction through a circuit.

Its magnitude may remain constant or vary with time, but its direction does not reverse.

A battery is a common source of direct current.

2.1 Sources of DC

Common DC sources include:

  • Batteries
  • Solar photovoltaic cells
  • DC generators
  • Fuel cells
  • Rectifiers
  • DC power supplies

2.2 Characteristics of DC

  1. Current flows in one direction.
  2. It has a positive and negative polarity at a given connection.
  3. It may be constant or variable in magnitude.
  4. Batteries commonly supply DC.
  5. It is widely used in electronic circuits.
  6. It is suitable for charging rechargeable batteries through appropriate charging systems.

2.3 Constant DC

In constant DC, the current magnitude and direction remain constant over time.

An ideal DC voltage source produces a constant voltage.

2.4 Pulsating DC

Pulsating DC flows in one direction, but its magnitude changes with time.

It can be produced by rectifying AC.

A smoothing circuit can reduce its fluctuations.

3. Alternating Current (AC)

Alternating current is electric current that periodically changes direction.

Its magnitude usually varies with time.

Most public electricity supply systems use AC.

3.1 Sources of AC

Common sources include:

  • AC generators
  • Power stations
  • Alternators
  • Inverters
  • Oscillators

3.2 Characteristics of AC

  1. Its direction changes periodically.
  2. Its magnitude may vary continuously.
  3. It has a frequency measured in hertz.
  4. It can be transformed to different voltage levels using transformers.
  5. It is widely used in electricity transmission and distribution.
  6. Its waveform may be sinusoidal or non-sinusoidal.

4. Sinusoidal Alternating Current

A common form of AC is a sinusoidal waveform.

Its instantaneous current is represented by:

[
\boxed{i=I_{\max}\sin\omega t}
]

Where:

  • (i) = instantaneous current
  • (I_{\max}) = maximum current
  • (\omega) = angular frequency
  • (t) = time

Similarly, instantaneous voltage can be expressed as:

[
\boxed{v=V_{\max}\sin\omega t}
]

Where (V_{\max}) is the peak voltage.

The voltage and current waveforms may have a phase difference depending on the electrical load.

5. Important Terms Related to AC

5.1 Cycle

One complete cycle is a complete repetition of an alternating waveform.

For a sinusoidal waveform, one cycle includes a positive half-cycle and a negative half-cycle.

5.2 Frequency

Frequency is the number of complete cycles per second.

It is represented by (f).

The SI unit is hertz (Hz).

[
\boxed{f=\frac{1}{T}}
]

5.3 Time Period

The time period is the time required to complete one cycle.

It is represented by (T).

[
\boxed{T=\frac{1}{f}}
]

5.4 Angular Frequency

Angular frequency measures the rate of change of phase in radians per second.

[
\boxed{\omega=2\pi f}
]

5.5 Amplitude or Peak Value

Amplitude is the maximum magnitude reached by an alternating voltage or current.

It is also called the peak value.

5.6 Peak-to-Peak Value

Peak-to-peak voltage is the difference between the maximum positive and maximum negative voltage values.

For a symmetrical sinusoidal waveform:

[
V_{pp}=2V_{\max}
]

6. Root Mean Square (RMS) Values

The RMS value of an alternating voltage or current is the equivalent DC value that produces the same heating effect in a resistor.

For a sinusoidal waveform:

[
\boxed{V_{\text{rms}}=\frac{V_{\max}}{\sqrt{2}}}
]

Similarly:

[
\boxed{I_{\text{rms}}=\frac{I_{\max}}{\sqrt{2}}}
]

Approximately:

[
V_{\text{rms}}=0.707V_{\max}
]

[
I_{\text{rms}}=0.707I_{\max}
]

RMS values are commonly used to specify AC supply voltage and current.

For example, a nominal 230 V AC supply refers to its RMS voltage.

Its peak value is approximately:

[
V_{\max}=230\sqrt{2}
]

[
V_{\max}\approx325,V
]

7. Average Value of AC

The average value of a symmetrical sinusoidal AC waveform over one complete cycle is zero.

This is because the positive and negative halves cancel each other.

For a sinusoidal waveform, the average value over one half-cycle is:

[
\boxed{V_{\text{avg}}=\frac{2V_{\max}}{\pi}}
]

Similarly:

[
\boxed{I_{\text{avg}}=\frac{2I_{\max}}{\pi}}
]

These average-value equations apply to a half-cycle of a sinusoidal waveform, not to the complete symmetrical cycle.

8. AC Frequency Around the World

Electrical supply frequency differs between countries.

Two commonly used standard frequencies are:

  • 50 Hz
  • 60 Hz

Pakistan’s nominal electricity supply frequency is 50 Hz.

A 50 Hz supply completes 50 cycles per second.

A 60 Hz supply completes 60 cycles per second.

The frequency of an AC supply is an important factor in the design and operation of motors, transformers and electrical equipment.

9. Phase Difference in AC Circuits

Voltage and current do not always reach their maximum values at the same time.

The difference between their phase angles is called the phase difference.

9.1 Resistive Circuit

In an ideal purely resistive AC circuit, voltage and current are in phase.

[
\phi=0^\circ
]

The power factor is:

[
\cos0^\circ=1
]

9.2 Inductive Circuit

In an ideal purely inductive circuit, current lags voltage by (90^\circ).

9.3 Capacitive Circuit

In an ideal purely capacitive circuit, current leads voltage by (90^\circ).

These relationships are important in understanding AC power and power factor.

10. AC Power

The real power consumed by a sinusoidal AC circuit is:

[
\boxed{P=V_{\text{rms}}I_{\text{rms}}\cos\phi}
]

Where (\phi) is the phase difference between voltage and current.

Three important power quantities are:

Real Power: Measured in watts (W).

Reactive Power: Measured in volt-amperes reactive (var).

Apparent Power: Measured in volt-amperes (VA).

The power factor is:

[
\boxed{\text{Power Factor}=\cos\phi=\frac{P}{S}}
]

A low power factor can increase current requirements and electrical losses for a given real power output.

11. Comparison Between AC and DC

Feature Alternating Current Direct Current
Direction Changes periodically Remains in one direction
Magnitude Usually varies with time May be constant or variable
Frequency Has a defined frequency for periodic AC Zero frequency for steady DC
Common source AC generator Battery
Voltage transformation Easily transformed using ordinary transformers Requires electronic conversion or specialized equipment
Common applications Household supply and industrial power Electronics, batteries and many DC systems

12. Advantages of AC

  1. Voltage can be changed easily using transformers.
  2. It is suitable for large-scale electricity transmission and distribution.
  3. AC generators are widely used in power stations.
  4. AC motors are common in industrial applications.
  5. Electricity distribution networks are designed around AC in many countries.

13. Advantages of DC

  1. It is suitable for electronic circuits.
  2. Batteries provide direct current.
  3. It is used in mobile phones and computers through suitable power circuits.
  4. It is required by many semiconductor devices and digital circuits.
  5. It is useful in battery storage and many renewable energy systems.
  6. High-voltage direct current (HVDC) is useful for certain long-distance transmission and interconnection applications.

14. Conversion Between AC and DC

Electrical systems often require conversion between AC and DC.

14.1 Rectification

Rectification is the process of converting AC into DC.

It is commonly performed using semiconductor diodes.

Types include:

  • Half-wave rectification
  • Full-wave rectification
  • Bridge rectification

14.2 Inversion

An inverter converts DC into AC.

Inverters are used in:

  • Solar power systems
  • Uninterruptible power supplies
  • Electric vehicles
  • Battery-based backup systems

14.3 AC-to-DC Power Supplies

Electronic power supplies commonly use:

  1. Transformer or other voltage conversion stage, where required.
  2. Rectifier.
  3. Filter.
  4. Voltage regulator.

Modern switched-mode power supplies may use more sophisticated electronic conversion arrangements.

15. AC and DC in Modern Energy Systems

Modern electrical systems use both AC and DC.

Solar photovoltaic panels produce DC electricity.

Batteries store electrical energy chemically and deliver DC during discharge.

Inverters convert DC into AC for many grid-connected and household applications.

Electric vehicles use batteries and DC electrical systems, while their motors may be driven by controlled AC or other electronically controlled waveforms.

HVDC systems transmit electricity using high-voltage direct current, particularly in certain long-distance and submarine cable applications.

16. Worked Numerical Problems

Problem 1: Frequency and Time Period

An AC supply has a frequency of 50 Hz. Calculate its time period.

Solution

[
T=\frac{1}{f}
]

[
T=\frac{1}{50}
]

[
\boxed{T=0.02,s}
]

Problem 2: Angular Frequency

Calculate the angular frequency of a 50 Hz AC supply.

Solution

[
\omega=2\pi f
]

[
\omega=2\pi\times50
]

[
\boxed{\omega=100\pi\approx314.16,rad/s}
]

Problem 3: Peak Voltage

An AC supply has an RMS voltage of 230 V. Calculate its peak voltage.

Solution

[
V_{\max}=V_{\text{rms}}\sqrt{2}
]

[
V_{\max}=230\times1.414
]

[
\boxed{V_{\max}\approx325.3,V}
]

Problem 4: RMS Current

A sinusoidal AC current has a peak value of 10 A. Calculate its RMS value.

Solution

[
I_{\text{rms}}=\frac{I_{\max}}{\sqrt{2}}
]

[
I_{\text{rms}}=\frac{10}{1.414}
]

[
\boxed{I_{\text{rms}}\approx7.07,A}
]

Problem 5: AC Real Power

An AC appliance operates at 230 V RMS, draws 5 A RMS and has a power factor of 0.8. Calculate its real power.

Solution

[
P=VI\cos\phi
]

[
P=230\times5\times0.8
]

[
\boxed{P=920,W}
]

17. Common Examination Distinctions

Term Meaning
AC Current that periodically reverses direction
DC Current that flows in one direction
Frequency Number of cycles per second
Time period Time required for one complete cycle
Amplitude Maximum value of a waveform
Peak value Maximum positive or negative magnitude
Peak-to-peak value Difference between maximum positive and negative values
RMS value Effective value producing the same heating effect in a resistor
Angular frequency Rate of phase change in radians per second
Rectification Conversion of AC into DC
Inversion Conversion of DC into AC
Power factor Ratio of real power to apparent power

18. 36 Key Takeaways for Exams

  1. Electric current is the rate of flow of electric charge.
  2. Direct current flows in one direction.
  3. Alternating current periodically reverses direction.
  4. A battery is a common source of DC.
  5. AC generators are common sources of alternating current.
  6. DC may be constant or variable in magnitude.
  7. Pulsating DC flows in one direction but varies in magnitude.
  8. A sinusoidal AC waveform is commonly represented by a sine function.
  9. One complete cycle contains positive and negative half-cycles.
  10. Frequency is the number of complete cycles per second.
  11. The SI unit of frequency is hertz.
  12. Time period is the time required for one complete cycle.
  13. Frequency and time period are related by (f=1/T).
  14. Angular frequency is given by (\omega=2\pi f).
  15. Amplitude is the maximum magnitude of a waveform.
  16. Peak-to-peak voltage is twice the peak voltage for a symmetrical sinusoidal waveform.
  17. RMS values represent effective AC voltage and current.
  18. For sinusoidal AC, (V_{\text{rms}}=V_{\max}/\sqrt{2}).
  19. For sinusoidal AC, (I_{\text{rms}}=I_{\max}/\sqrt{2}).
  20. The average value of a symmetrical sinusoidal waveform over a complete cycle is zero.
  21. The average value over a positive half-cycle is (2V_{\max}/\pi) for sinusoidal voltage.
  22. Pakistan’s nominal electricity supply frequency is 50 Hz.
  23. AC voltage and current are in phase in an ideal resistive circuit.
  24. Current lags voltage by (90^\circ) in an ideal inductive circuit.
  25. Current leads voltage by (90^\circ) in an ideal capacitive circuit.
  26. Real AC power is (P=VI\cos\phi), using RMS values.
  27. Power factor is the ratio of real power to apparent power.
  28. AC is widely used in electricity generation and distribution.
  29. Transformers can change AC voltage levels.
  30. DC is widely used in batteries and electronic circuits.
  31. Rectification converts AC into DC.
  32. Inversion converts DC into AC.
  33. Diodes are commonly used in rectifier circuits.
  34. Solar photovoltaic panels generate DC electricity.
  35. HVDC technology is used in certain long-distance and submarine power transmission systems.
  36. Modern electrical systems use both AC and DC according to their technical requirements.
9 Views