Elasticity, Stress, Strain and Mechanical Properties: 50 MCQs
1 Elasticity is the property of a material by which it:
(a) Conducts electricity
(b) Regains its original shape after removal of deforming force, within its elastic limit
(c) Changes its chemical composition
(d) None of these
2 A force that changes the shape or size of a body is called:
(a) Deforming force
(b) Buoyant force
(c) Nuclear force
(d) None of these
3 Stress is defined as:
(a) Force multiplied by area
(b) Change in length divided by original length
(c) Deforming force per unit area
(d) None of these
4 The SI unit of stress is:
(a) Newton
(b) Pascal
(c) Joule
(d) None of these
5 The dimensional formula of stress is the same as that of:
(a) Pressure
(b) Energy
(c) Velocity
(d) None of these
6 Strain is defined as:
(a) Force per unit volume
(b) Mass per unit area
(c) Energy per unit time
(d) None of these
7 Longitudinal strain is the ratio of:
(a) Original length to change in length
(b) Change in length to original length
(c) Force to cross-sectional area
(d) None of these
8 Strain is:
(a) A dimensionless quantity
(b) Measured in newtons
(c) Measured in pascals
(d) None of these
9 Hooke’s law states that, within the elastic limit:
(a) Stress is inversely proportional to strain
(b) Stress is independent of strain
(c) Stress is directly proportional to strain
(d) None of these
10 The proportionality constant between longitudinal stress and longitudinal strain is:
(a) Bulk modulus
(b) Young’s modulus
(c) Shear force
(d) None of these
11 Young’s modulus is defined as:
(a) Longitudinal stress divided by longitudinal strain
(b) Longitudinal strain divided by stress
(c) Force multiplied by displacement
(d) None of these
12 The SI unit of Young’s modulus is:
(a) Newton
(b) Joule
(c) Pascal
(d) None of these
13 A material with a high Young’s modulus is generally:
(a) More rigid under tensile or compressive loading
(b) More easily stretched by the same stress
(c) Always less dense
(d) None of these
14 The ability of a material to undergo deformation and return to its original shape is associated with:
(a) Plasticity
(b) Elasticity
(c) Brittleness
(d) None of these
15 Plastic deformation is deformation that:
(a) Disappears completely when the force is removed
(b) Occurs only in gases
(c) Remains after the deforming force is removed
(d) None of these
16 The elastic limit is the maximum stress up to which a material:
(a) Behaves elastically and can recover its original shape
(b) Must fracture immediately
(c) Has zero strain
(d) None of these
17 Beyond the elastic limit, a material may undergo:
(a) Perfect recovery in every case
(b) Plastic deformation
(c) No deformation
(d) None of these
18 The bulk modulus measures a material’s resistance to:
(a) Change in shape at constant volume
(b) Change in temperature
(c) Change in volume under pressure
(d) None of these
19 Bulk modulus is defined as the ratio of:
(a) Volumetric stress to volumetric strain, with a negative sign for compression
(b) Shear strain to shear stress
(c) Length to area
(d) None of these
20 The negative sign in the conventional expression for bulk modulus accounts for the fact that:
(a) Pressure is always negative
(b) Volume decreases when pressure increases
(c) Mass decreases during compression
(d) None of these
21 Shear modulus is also called:
(a) Young’s modulus
(b) Bulk modulus
(c) Modulus of rigidity
(d) None of these
22 Shear modulus measures resistance to:
(a) Change in volume only
(b) Shape deformation due to shear stress
(c) Temperature change
(d) None of these
23 A shear force acts:
(a) Parallel to a surface
(b) Only perpendicular to a surface
(c) Only through the centre of gravity
(d) None of these
24 Poisson’s ratio is the ratio of:
(a) Longitudinal stress to longitudinal strain
(b) Volume change to pressure change
(c) Lateral strain to longitudinal strain, with a negative sign under tension
(d) None of these
25 When a wire is stretched, its length generally increases and its diameter:
(a) Increases by the same proportion
(b) Decreases
(c) Remains unchanged in all materials
(d) None of these
26 The SI unit of force constant of a spring is:
(a) N/m
(b) N·m
(c) kg/m³
(d) None of these
27 Hooke’s law for a spring is commonly expressed as:
(a) (F=kx) for the magnitude of restoring force
(b) (F=mv)
(c) (F=ma^2)
(d) None of these
28 The negative sign in the vector form of Hooke’s law indicates that the restoring force acts:
(a) In the direction of displacement
(b) At right angles to displacement
(c) Opposite to displacement
(d) None of these
29 The energy stored in a stretched or compressed ideal spring is:
(a) (kx)
(b) (\frac{1}{2}kx^2)
(c) (mv)
(d) None of these
30 If the extension of an ideal spring is doubled, its stored elastic potential energy becomes:
(a) Twice
(b) Half
(c) Four times
(d) None of these
31 The stiffness of a spring is represented by its:
(a) Spring constant
(b) Density
(c) Poisson’s ratio
(d) None of these
32 A spring with a larger spring constant is:
(a) Softer
(b) Stiffer
(c) Always longer
(d) None of these
33 The ability of a material to absorb energy and deform plastically before fracture is associated with:
(a) Brittleness
(b) Conductivity
(c) Toughness
(d) None of these
34 Ductility is the ability of a material to:
(a) Be drawn into wires
(b) Resist all temperature changes
(c) Float in water
(d) None of these
35 Malleability is the ability of a material to:
(a) Conduct sound
(b) Be hammered or rolled into thin sheets
(c) Return to its original shape after every deformation
(d) None of these
36 A brittle material generally:
(a) Undergoes extensive plastic deformation before fracture
(b) Has unlimited ductility
(c) Fractures with little plastic deformation
(d) None of these
37 Which of the following is generally a ductile metal?
(a) Copper
(b) Chalk
(c) Glass
(d) None of these
38 The property that describes resistance to scratching or indentation is:
(a) Elasticity
(b) Hardness
(c) Viscosity
(d) None of these
39 The ability of a material to absorb energy within its elastic range is known as:
(a) Plasticity
(b) Brittleness
(c) Resilience
(d) None of these
40 The energy absorbed per unit volume up to fracture is associated with:
(a) Toughness
(b) Density
(c) Surface tension
(d) None of these
41 A stress-strain curve is used to study:
(a) Electrical conductivity
(b) Mechanical behaviour of materials
(c) Chemical composition only
(d) None of these
42 The slope of the initial straight-line portion of a stress-strain curve in tension represents:
(a) Density
(b) Poisson’s ratio
(c) Young’s modulus
(d) None of these
43 The point beyond which permanent deformation begins is associated with the:
(a) Yield point
(b) Melting point
(c) Boiling point
(d) None of these
44 Ultimate tensile strength is the maximum:
(a) Strain experienced by a material
(b) Tensile stress a material can withstand
(c) Elastic recovery of a material
(d) None of these
45 Fracture occurs when a material:
(a) Reaches zero stress
(b) Returns to its original dimensions
(c) Breaks or separates into parts
(d) None of these
46 A factor of safety is commonly defined as the ratio of:
(a) A specified failure strength to the allowable working stress
(b) Working stress to density
(c) Mass to volume
(d) None of these
47 A material used in a bridge structure should generally have:
(a) Zero strength
(b) Suitable strength, stiffness and durability
(c) Unlimited plastic deformation
(d) None of these
48 Concrete is generally strong in:
(a) Tension only
(b) Torsion only
(c) Compression
(d) None of these
49 Reinforcing steel is incorporated into reinforced concrete mainly to improve its resistance to:
(a) Tensile forces
(b) Radioactive decay
(c) Magnetic attraction
(d) None of these
50 Which statement about elasticity is correct?
(a) All materials are perfectly elastic under all conditions
(b) Elastic behaviour is limited by the material’s elastic limit
(c) Elasticity is measured in kilograms
(d) None of these
Answer Key
1 (b) Recovers original shape within elastic limit
2 (a) Deforming force
3 (c) Deforming force per unit area
4 (b) Pascal
5 (a) Pressure
6 (d) None of these
7 (b) Change in length / original length
8 (a) Dimensionless quantity
9 (c) Stress directly proportional to strain
10 (b) Young’s modulus
11 (a) Longitudinal stress / longitudinal strain
12 (c) Pascal
13 (a) More rigid under loading
14 (b) Elasticity
15 (c) Remains after force removal
16 (a) Behaves elastically and recovers
17 (b) Plastic deformation
18 (c) Change in volume under pressure
19 (a) Volumetric stress / volumetric strain, with negative sign
20 (b) Volume decreases as pressure increases
21 (c) Modulus of rigidity
22 (b) Shape deformation due to shear stress
23 (a) Parallel to a surface
24 (c) Negative ratio of lateral to longitudinal strain
25 (b) Decreases
26 (a) N/m
27 (a) (F=kx) for magnitude
28 (c) Opposite to displacement
29 (b) (\frac{1}{2}kx^2)
30 (c) Four times
31 (a) Spring constant
32 (b) Stiffer
33 (c) Toughness
34 (a) Drawn into wires
35 (b) Hammered or rolled into thin sheets
36 (c) Fractures with little plastic deformation
37 (a) Copper
38 (b) Hardness
39 (c) Resilience
40 (a) Toughness
41 (b) Mechanical behaviour
42 (c) Young’s modulus
43 (a) Yield point
44 (b) Maximum tensile stress
45 (c) Breaks or separates into parts
46 (a) Failure strength / allowable working stress
47 (b) Suitable strength, stiffness and durability
48 (c) Compression
49 (a) Tensile forces
50 (b) Elastic behaviour is limited by the elastic limit