Table of Contents
Conduction, Convection and Thermal Radiation
Multiple-Choice Questions
1 Heat transfer through a material without bulk movement of the material is called:
(a) Convection
(b) Conduction
(c) Radiation
(d) None of these
2 Heat transfer through the movement of fluids is known as:
(a) Conduction
(b) Radiation
(c) Convection
(d) None of these
3 Which mode of heat transfer does not require a material medium?
(a) Radiation
(b) Conduction
(c) Convection
(d) None of these
4 Which material is generally a good conductor of heat?
(a) Wood
(b) Copper
(c) Rubber
(d) None of these
5 Which of the following is generally a poor conductor of heat?
(a) Aluminium
(b) Silver
(c) Wood
(d) None of these
6 Heat travels through a metal rod from its hot end to its cold end mainly by:
(a) Conduction
(b) Convection
(c) Radiation only
(d) None of these
7 The transfer of heat through the circulation of heated fluid is:
(a) Radiation
(b) Conduction
(c) Convection
(d) None of these
8 Which type of heat transfer is primarily responsible for warming the Earth by energy from the Sun?
(a) Conduction
(b) Convection
(c) Conduction and convection
(d) None of these
9 The rate of heat conduction through a uniform slab depends directly on:
(a) Temperature difference across the slab
(b) Thickness of the slab
(c) Density alone
(d) None of these
10 According to Fourier’s law, the rate of heat conduction through a slab is proportional to:
(a) Its thickness
(b) Its cross-sectional area and temperature gradient
(c) Its mass alone
(d) None of these
11 The SI unit of thermal conductivity is:
(a) J kg⁻¹ K⁻¹
(b) W m⁻²
(c) W m⁻¹ K⁻¹
(d) None of these
12 Which metal is among the best conductors of heat?
(a) Silver
(b) Lead
(c) Iron
(d) None of these
13 Why are cooking pots commonly made of metals?
(a) Metals have very low melting points
(b) Metals conduct heat effectively
(c) Metals prevent all heat loss
(d) None of these
14 Handles of cooking utensils are often made of wood or plastic because these materials:
(a) Are excellent conductors of heat
(b) Produce heat internally
(c) Are relatively poor conductors of heat
(d) None of these
15 Which mode of heat transfer is dominant in the circulation of water heated in a saucepan?
(a) Convection
(b) Conduction only
(c) Radiation only
(d) None of these
16 In natural convection, fluid motion is mainly caused by:
(a) External mechanical pumping
(b) Density differences produced by temperature variations
(c) Magnetic fields alone
(d) None of these
17 Warm air generally rises because it:
(a) Has greater density than cold air
(b) Has no mass
(c) Becomes less dense than surrounding cooler air
(d) None of these
18 Sea breezes commonly develop during the day because:
(a) Land heats faster than the sea
(b) Sea water heats faster than land
(c) Air pressure is always equal over land and sea
(d) None of these
19 During a daytime sea breeze, cooler air generally moves:
(a) From land towards the sea at the surface
(b) From sea towards the land at the surface
(c) Vertically upward from the sea only
(d) None of these
20 Land breezes commonly occur at night because:
(a) Land remains warmer than the sea
(b) The sea cools faster than the land
(c) Land cools faster than the sea
(d) None of these
21 Which mode of heat transfer is responsible for the formation of convection currents in the atmosphere?
(a) Convection
(b) Conduction only
(c) Radiation only
(d) None of these
22 The Sun transfers energy to Earth primarily through:
(a) Conduction
(b) Convection
(c) Thermal radiation
(d) None of these
23 Thermal radiation is mainly electromagnetic radiation emitted due to:
(a) The motion of charged particles only in an electric wire
(b) The temperature of matter
(c) Chemical combustion only
(d) None of these
24 Which surface is generally the best absorber of thermal radiation?
(a) Dull black surface
(b) Polished silver surface
(c) Shiny white surface
(d) None of these
25 Which surface is generally the poorest emitter of thermal radiation?
(a) Dull black surface
(b) Rough dark surface
(c) Polished shiny surface
(d) None of these
26 A blackened surface is used in a solar thermal collector because it:
(a) Reflects nearly all incoming radiation
(b) Absorbs solar radiation effectively
(c) Prevents all heat transfer
(d) None of these
27 A shiny silver surface is used in a thermos flask mainly to:
(a) Increase convection
(b) Increase conduction
(c) Reduce heat transfer by radiation
(d) None of these
28 The rate of emission of thermal radiation from an ideal blackbody is proportional to:
(a) The fourth power of its absolute temperature
(b) Its temperature alone
(c) The square of its mass
(d) None of these
29 The Stefan–Boltzmann constant is associated with:
(a) Thermal conductivity
(b) Blackbody radiation
(c) Specific heat capacity
(d) None of these
30 The SI unit of the Stefan–Boltzmann constant is:
(a) W m⁻¹ K⁻¹
(b) J kg⁻¹ K⁻¹
(c) W m⁻² K⁻⁴
(d) None of these
31 According to Wien’s displacement law, the wavelength of maximum emission from a blackbody:
(a) Increases as absolute temperature increases
(b) Is independent of temperature
(c) Decreases as absolute temperature increases
(d) None of these
32 Which object emits more thermal radiation, assuming equal surface areas and emissivities?
(a) An object at 500 K
(b) An object at 300 K
(c) An object at 200 K
(d) None of these
33 A vacuum flask reduces heat transfer by:
(a) Increasing all three modes of heat transfer
(b) Reducing conduction and convection through its vacuum space and radiation through reflective surfaces
(c) Eliminating the need for insulation
(d) None of these
34 Why is a vacuum used between the walls of a thermos flask?
(a) To increase convection
(b) To increase conduction
(c) To greatly reduce conduction and convection through the gap
(d) None of these
35 Which heat transfer mechanism is most important in a conventional hot-air balloon?
(a) Convection
(b) Conduction through the balloon fabric
(c) Radiation from the ground
(d) None of these
36 Which mode of heat transfer is responsible for the warming effect of a fire felt from a distance?
(a) Conduction
(b) Thermal radiation
(c) Convection only
(d) None of these
37 Why are radiators commonly positioned near the floor in many heating systems?
(a) To prevent air movement
(b) To make the room colder
(c) To promote circulation of warm air through convection
(d) None of these
38 The thermal conductivity of a material measures its ability to:
(a) Conduct heat
(b) Store electric charge
(c) Resist mechanical deformation
(d) None of these
39 Which material is commonly used as thermal insulation in buildings?
(a) Copper
(b) Fibreglass
(c) Silver
(d) None of these
40 Double-glazed windows reduce heat loss mainly because:
(a) The glass produces heat
(b) The space between panes increases thermal radiation
(c) The trapped gas layer reduces conduction and convection
(d) None of these
41 Which statement about convection is correct?
(a) It occurs only in solids
(b) It involves the bulk movement of a fluid
(c) It can occur in a vacuum
(d) None of these
42 Which statement about conduction is correct?
(a) It can occur in solids, liquids and gases
(b) It requires bulk fluid movement
(c) It occurs only through electromagnetic waves
(d) None of these
43 Which statement about thermal radiation is correct?
(a) It requires air as a medium
(b) It cannot travel through space
(c) It can travel through a vacuum
(d) None of these
44 The rate of heat transfer through a wall generally increases when:
(a) The wall becomes thicker, with all other factors fixed
(b) The temperature difference across it increases
(c) Its thermal conductivity decreases
(d) None of these
45 Which device is designed to reduce heat exchange with the surroundings?
(a) Vacuum flask
(b) Electric heater
(c) Convection oven
(d) None of these
46 In a refrigerator, heat is removed from its interior and released to the surroundings through:
(a) Conduction alone
(b) A refrigeration cycle involving heat transfer and work
(c) Radiation alone
(d) None of these
47 The greenhouse effect involves the absorption and re-emission of:
(a) Only visible sunlight
(b) Sound waves
(c) Infrared radiation by atmospheric gases
(d) None of these
48 Which of the following is a practical example of forced convection?
(a) Water circulating through a pump-driven heating system
(b) Warm air rising naturally above a heater
(c) Heat passing along a stationary metal bar
(d) None of these
49 A dull black object cools faster than a polished object under otherwise comparable conditions because it generally:
(a) Has no internal energy
(b) Is a better emitter of thermal radiation
(c) Has zero thermal conductivity
(d) None of these
50 Which statement correctly distinguishes the three main modes of heat transfer?
(a) Conduction requires electromagnetic waves, convection requires a vacuum, and radiation requires a solid
(b) All three require bulk movement of matter
(c) Conduction involves microscopic energy transfer, convection involves fluid motion, and radiation involves electromagnetic waves
(d) None of these
Answer Key
1 (b) Conduction
2 (c) Convection
3 (a) Radiation
4 (b) Copper
5 (c) Wood
6 (a) Conduction
7 (c) Convection
8 (d) None of these
9 (a) Temperature difference across the slab
10 (b) Cross-sectional area and temperature gradient
11 (c) W m⁻¹ K⁻¹
12 (a) Silver
13 (b) Metals conduct heat effectively
14 (c) Relatively poor conductors of heat
15 (a) Convection
16 (b) Density differences produced by temperature variations
17 (c) Becomes less dense than surrounding cooler air
18 (a) Land heats faster than the sea
19 (b) From sea towards the land at the surface
20 (c) Land cools faster than the sea
21 (a) Convection
22 (c) Thermal radiation
23 (b) The temperature of matter
24 (a) Dull black surface
25 (c) Polished shiny surface
26 (b) Absorbs solar radiation effectively
27 (c) Reduce heat transfer by radiation
28 (a) Fourth power of absolute temperature
29 (b) Blackbody radiation
30 (c) W m⁻² K⁻⁴
31 (c) Decreases as absolute temperature increases
32 (a) An object at 500 K
33 (b) Reducing conduction, convection and radiation
34 (c) Greatly reduce conduction and convection
35 (a) Convection
36 (b) Thermal radiation
37 (c) Promote circulation of warm air
38 (a) Conduct heat
39 (b) Fibreglass
40 (c) The trapped gas layer reduces conduction and convection
41 (b) Bulk movement of a fluid
42 (a) It can occur in solids, liquids and gases
43 (c) It can travel through a vacuum
44 (b) The temperature difference across it increases
45 (a) Vacuum flask
46 (b) A refrigeration cycle involving heat transfer and work
47 (c) Infrared radiation by atmospheric gases
48 (a) Pump-driven heating system
49 (b) Better emitter of thermal radiation
50 (c) Conduction involves microscopic energy transfer, convection involves fluid motion, and radiation involves electromagnetic waves