General Science – Physics – Nuclear Fission and Nuclear Fusion

Nuclear Fission and Nuclear Fusion

1. Introduction

Nuclear fission and nuclear fusion are two major nuclear reactions through which enormous amounts of energy can be released.

Both processes involve changes in atomic nuclei and are governed by the relationship between mass and energy.

  • Nuclear fission involves the splitting of a heavy atomic nucleus into smaller nuclei.
  • Nuclear fusion involves the joining of light atomic nuclei to form a heavier nucleus.

Nuclear fission is used in present-day nuclear power stations. Nuclear fusion is the process that powers the Sun and other stars and is being investigated as a potential source of future electricity generation.

Understanding these processes is essential for nuclear physics, energy technology, astronomy and modern science.

2. Nuclear Structure and Binding Energy

An atomic nucleus consists of protons and neutrons held together by the strong nuclear force.

Protons repel one another because they carry positive electric charges. However, at very short nuclear distances, the strong nuclear force can overcome this electrostatic repulsion and bind nucleons together.

The energy required to separate a nucleus completely into its individual protons and neutrons is called its nuclear binding energy.

The mass of a bound nucleus is less than the combined mass of its separate constituent nucleons.

The difference is called the mass defect.

[
\boxed{\Delta m=Zm_p+Nm_n-m_{\text{nucleus}}}
]

Where:

  • (\Delta m) = mass defect
  • (Z) = number of protons
  • (N) = number of neutrons
  • (m_p) = mass of a proton
  • (m_n) = mass of a neutron
  • (m_{\text{nucleus}}) = mass of the nucleus

The corresponding binding energy is:

[
\boxed{E_b=\Delta mc^2}
]

Where (c) is the speed of light.

The energy released in a nuclear reaction can be explained through changes in total nuclear binding energy and the corresponding mass difference.

3. Einstein’s Mass-Energy Equivalence

Albert Einstein established that mass and energy are related.

The famous equation is:

[
\boxed{E=mc^2}
]

Where:

  • (E) = energy
  • (m) = mass
  • (c) = speed of light in vacuum

The speed of light is approximately:

[
c=3\times10^8,m/s
]

Because the speed of light is extremely large, even a very small mass difference corresponds to a substantial amount of energy.

In nuclear reactions, the total mass of the products may be lower than the total mass of the reactants. The difference appears as released energy, including kinetic energy of particles and electromagnetic radiation.

4. Nuclear Binding Energy per Nucleon

Binding energy per nucleon is the average binding energy associated with each proton or neutron in a nucleus.

[
\boxed{\text{Binding energy per nucleon}=\frac{\text{Total binding energy}}{\text{Number of nucleons}}}
]

It is an important indicator of nuclear stability.

The binding energy per nucleon generally increases for light nuclei as their mass number increases, reaches a maximum around the iron and nickel region, and then gradually decreases for very heavy nuclei.

This pattern explains why both fission and fusion can release energy.

  • Heavy nuclei can release energy by splitting into medium-mass nuclei with greater binding energy per nucleon.
  • Light nuclei can release energy by combining to form heavier nuclei with greater binding energy per nucleon.

5. Nuclear Fission

Nuclear fission is the process in which a heavy atomic nucleus splits into two or more lighter nuclei, generally releasing neutrons and a large amount of energy.

It may occur spontaneously in some heavy isotopes or be induced by the absorption of a neutron.

Common nuclear fuels include uranium-235 and plutonium-239.

5.1 Example of Uranium-235 Fission

A simplified example of neutron-induced fission is:

[
{}^{235}{92}U+{}^1_0n
\rightarrow{}^{141}
{56}Ba+{}^{92}_{36}Kr+3{}^1_0n+\text{Energy}
]

This is one possible fission pathway. Actual fission can produce many different combinations of daughter nuclei.

The total mass number and atomic number are conserved in the nuclear equation.

5.2 What Happens During Fission?

In a typical neutron-induced fission process:

  1. A suitable heavy nucleus absorbs a neutron.
  2. The resulting nucleus becomes highly excited and unstable.
  3. The nucleus deforms and separates into smaller fragments.
  4. Additional neutrons may be released.
  5. Energy is released through the kinetic energy of the fragments, neutrons and radiation.

The released energy is largely converted into heat in a nuclear reactor.

6. Chain Reaction

A nuclear chain reaction occurs when neutrons released from one fission event cause further fission events.

If each fission event produces neutrons that induce additional fissions, the process can continue.

The behaviour of a chain reaction depends on the number of neutrons that successfully produce further fissions.

Three conditions are commonly described.

Subcritical condition: The chain reaction decreases with time.

Critical condition: The chain reaction is self-sustaining at a stable rate.

Supercritical condition: The chain reaction increases with time.

The multiplication factor, (k), describes the average number of neutrons in one generation compared with the preceding generation.

  • (k<1): Subcritical
  • (k=1): Critical
  • (k>1): Supercritical

In a controlled nuclear power reactor, the chain reaction is maintained under controlled operating conditions.

7. Nuclear Fusion

Nuclear fusion is the process in which two light atomic nuclei combine to form a heavier nucleus, releasing energy when the products have greater total binding energy.

Fusion is the main energy-producing process in the Sun and other stars.

The nuclei involved are positively charged, so they repel each other through electrostatic forces.

To fuse, they must approach sufficiently closely for the strong nuclear force to become effective.

This generally requires extremely high temperatures and suitable conditions of density and confinement.

7.1 Example: Deuterium-Tritium Fusion

A commonly studied fusion reaction involves deuterium and tritium, two isotopes of hydrogen.

[
{}^2_1H+{}^3_1H
\rightarrow{}^4_2He+{}^1_0n+\text{Energy}
]

The reaction releases approximately 17.6 MeV of energy.

The products are:

  • A helium-4 nucleus.
  • A neutron.
  • Released kinetic energy.

7.2 Conditions Required for Fusion

Important conditions include:

  1. Extremely high temperature.
  2. Sufficient particle density.
  3. Adequate confinement time.
  4. Suitable fuel composition.
  5. Effective control of the hot plasma.

High temperatures give nuclei sufficient kinetic energy to overcome much of the electrostatic repulsion.

In practical fusion systems, quantum tunnelling also contributes to the probability of fusion reactions.

8. Nuclear Fusion in the Sun

The Sun produces energy mainly through the proton-proton chain reaction.

In this process, hydrogen nuclei ultimately combine to form helium, releasing energy.

The overall simplified reaction is:

[
4{}^1_1H\rightarrow{}^4_2He+2e^++2\nu_e+\text{Energy}
]

The complete sequence involves several intermediate nuclear reactions.

A small amount of mass is converted into energy.

The Sun’s enormous gravitational pressure and high central temperature provide the conditions necessary for sustained nuclear fusion.

The energy released eventually reaches the Earth as sunlight and other forms of solar radiation.

9. Comparison Between Nuclear Fission and Nuclear Fusion

Property Nuclear Fission Nuclear Fusion
Basic process Splitting of a heavy nucleus Joining of light nuclei
Typical fuel Uranium-235, plutonium-239 Deuterium, tritium
Conditions Can be initiated by neutron absorption Requires extremely high temperature and suitable confinement
Chain reaction Possible Not the same neutron-driven chain reaction mechanism
Energy release Very large Very large
Current electricity generation Commercially established Not yet commercially established as a general electricity source
Waste Produces radioactive fission products and other waste Fuel and reaction products differ; neutron activation and tritium management remain important issues
Natural occurrence Some spontaneous fission occurs Powers stars

10. Energy Released in Nuclear Reactions

The energy released in a nuclear reaction is calculated from the mass difference between reactants and products.

[
\boxed{Q=\Delta mc^2}
]

Where:

  • (Q) = energy released
  • (\Delta m) = mass difference
  • (c) = speed of light

In nuclear physics, energy is commonly expressed in electronvolts (eV) and mega-electronvolts (MeV).

[
1,eV=1.602\times10^{-19},J
]

[
1,MeV=1.602\times10^{-13},J
]

A nuclear reaction releases energy when the total rest mass of its products is less than the total rest mass of its reactants, with the difference appearing as energy.

11. Controlled and Uncontrolled Fission

Nuclear fission can occur under different conditions.

11.1 Controlled Fission

Controlled fission is used in nuclear reactors.

The reaction rate is managed to maintain a stable and useful release of energy.

Control systems, neutron-absorbing materials and engineered safety systems are used to regulate reactor operation.

11.2 Uncontrolled Fission

An uncontrolled, rapidly increasing fission chain reaction can release energy extremely quickly.

Nuclear weapons are designed around rapid energy release from nuclear reactions.

Civilian nuclear power reactors are fundamentally designed to maintain controlled operation and incorporate multiple safety systems.

12. Fusion Research and Magnetic Confinement

A major challenge in controlled fusion is containing extremely hot plasma.

Plasma is a state of matter consisting of charged particles, including ions and electrons.

Ordinary solid containers cannot directly hold fusion plasma at the required temperatures.

One approach is magnetic confinement.

12.1 Tokamak

A tokamak is a device that uses strong magnetic fields to confine hot plasma in a doughnut-shaped chamber.

Its magnetic configuration helps keep the plasma away from the chamber walls.

12.2 Stellarator

A stellarator is another magnetic confinement device that uses complex three-dimensional magnetic fields to confine plasma.

It differs from a tokamak in its magnetic configuration and method of producing the confining field.

12.3 Inertial Confinement

Inertial confinement fusion uses intense energy, often from powerful lasers, to compress and heat a very small fuel target for an extremely short period.

The resulting conditions can produce fusion reactions before the fuel expands.

13. Advantages and Challenges of Nuclear Fission

Advantages

  1. Very high energy output from a small quantity of fuel.
  2. Low operational carbon dioxide emissions compared with fossil-fuel electricity generation.
  3. Reliable electricity production when plants operate properly.
  4. Reduced dependence on fossil fuels.
  5. High energy density.

Challenges

  1. Radioactive waste management.
  2. High construction and decommissioning costs.
  3. Potential for serious accidents if safety systems fail.
  4. Security and proliferation concerns.
  5. Mining and fuel-cycle environmental impacts.
  6. Need for long-term institutional and regulatory oversight.

14. Potential Advantages and Challenges of Nuclear Fusion

Potential Advantages

  1. Very high energy density.
  2. Deuterium is available in water.
  3. No self-sustaining fission chain reaction.
  4. No direct carbon dioxide emission from the fusion reaction itself.
  5. Potential for reduced long-lived radioactive waste compared with conventional fission systems.

Challenges

  1. Achieving and maintaining suitable plasma conditions.
  2. Managing extreme heat and neutron exposure.
  3. Developing durable materials.
  4. Producing and managing tritium fuel.
  5. Achieving reliable net electricity generation.
  6. Making systems economically competitive.

Fusion research has achieved important scientific milestones, but commercial fusion electricity generation remains a major engineering and economic challenge.

15. Worked Numerical Problems

Problem 1: Energy from Mass Conversion

Calculate the energy equivalent of a mass of (0.001,kg).

Solution

Using:

[
E=mc^2
]

[
E=0.001\times(3\times10^8)^2
]

[
E=0.001\times9\times10^{16}
]

[
\boxed{E=9\times10^{13},J}
]

Problem 2: Mass Defect

A nuclear reaction has a total reactant mass of 10.010 atomic mass units and a total product mass of 10.000 atomic mass units. Calculate the energy released.

Given:

[
1,u=931.5,MeV/c^2
]

Solution

Mass defect:

[
\Delta m=10.010-10.000
]

[
\Delta m=0.010,u
]

Energy released:

[
Q=0.010\times931.5
]

[
\boxed{Q=9.315,MeV}
]

Problem 3: Conversion of MeV into Joules

Convert 5 MeV into joules.

Solution

[
1,MeV=1.602\times10^{-13},J
]

[
5,MeV=5\times1.602\times10^{-13}
]

[
\boxed{E=8.01\times10^{-13},J}
]

Problem 4: Binding Energy per Nucleon

A nucleus has a total binding energy of 56 MeV and contains 8 nucleons. Calculate its average binding energy per nucleon.

Solution

[
\frac{E_b}{A}=\frac{56}{8}
]

[
\boxed{7,MeV\text{ per nucleon}}
]

Problem 5: Energy from a Nuclear Reaction

A nuclear reaction releases 200 MeV per event. Calculate the energy released by (10^6) such reactions in joules.

Solution

Energy per event:

[
200,MeV=200\times1.602\times10^{-13},J
]

Total energy:

[
E=10^6\times200\times1.602\times10^{-13}
]

[
\boxed{E=3.204\times10^{-5},J}
]

16. Common Examination Distinctions

Concept Meaning
Nuclear fission Splitting of a heavy nucleus
Nuclear fusion Combining of light nuclei
Mass defect Difference between constituent nucleon mass and nuclear mass
Binding energy Energy required to separate a nucleus into its constituent nucleons
Binding energy per nucleon Average binding energy per proton or neutron
Chain reaction Repeated nuclear reactions initiated by products of earlier reactions
Critical condition Condition in which a chain reaction is self-sustaining
Subcritical condition Condition in which the chain reaction decreases
Supercritical condition Condition in which the chain reaction increases
Plasma Ionized state of matter containing charged particles
Tokamak Magnetic confinement device for fusion plasma
Stellarator Fusion device using three-dimensional magnetic confinement
Proton-proton chain Main energy-producing fusion process in the Sun

17. 36 Key Takeaways for Exams

  1. Nuclear fission and fusion are two important nuclear energy processes.
  2. Nuclear fission involves the splitting of a heavy nucleus.
  3. Nuclear fusion involves the combination of light nuclei.
  4. The nucleus contains protons and neutrons.
  5. The strong nuclear force holds nucleons together.
  6. Nuclear binding energy is the energy required to separate a nucleus into its constituent nucleons.
  7. Mass defect is the difference between the total mass of separate nucleons and the actual nuclear mass.
  8. Einstein’s mass-energy relationship is (E=mc^2).
  9. A small mass difference can correspond to a very large amount of energy.
  10. Binding energy per nucleon is an indicator of nuclear stability.
  11. Binding energy per nucleon reaches a maximum around the iron and nickel region.
  12. Heavy nuclei can release energy through fission.
  13. Light nuclei can release energy through fusion.
  14. Uranium-235 is a commonly used nuclear fission fuel.
  15. Plutonium-239 is another fissile material.
  16. Fission may release additional neutrons.
  17. A chain reaction occurs when neutrons from earlier fission events initiate further fissions.
  18. A subcritical chain reaction decreases with time.
  19. A critical chain reaction is self-sustaining.
  20. A supercritical chain reaction increases with time.
  21. The multiplication factor describes the neutron population from one generation to the next.
  22. Nuclear reactors use controlled fission to produce heat.
  23. Deuterium and tritium are important fuels in fusion research.
  24. Deuterium-tritium fusion produces helium-4 and a neutron.
  25. Nuclear fusion powers the Sun and other stars.
  26. The proton-proton chain is the main fusion process in the Sun.
  27. Fusion requires extremely high temperatures and suitable confinement conditions.
  28. Plasma is an ionized state of matter containing charged particles.
  29. A tokamak uses magnetic fields to confine plasma.
  30. A stellarator is another magnetic confinement fusion device.
  31. Inertial confinement uses intense energy to compress and heat a small fuel target.
  32. Nuclear fission is commercially used for electricity generation.
  33. Commercial fusion electricity generation remains a major research and engineering challenge.
  34. Fission produces radioactive products that require safe management.
  35. Fusion systems also face challenges involving neutron damage, materials and fuel management.
  36. Both fission and fusion release nuclear energy through changes in mass and binding energy.
6 Views