Table of Contents
Latent Heat and Changes of State
Multiple-Choice Questions
1 Latent heat is the energy absorbed or released during:
(a) A temperature increase without a phase change
(b) A change of state without a temperature change
(c) A change in mass without a temperature change
(d) None of these
2 The SI unit of specific latent heat is:
(a) J kg⁻¹
(b) J K⁻¹
(c) J kg⁻¹ K⁻¹
(d) None of these
3 The heat required for a phase change is calculated using:
(a) Q = mcΔT
(b) Q = mgh
(c) Q = mL
(d) None of these
4 In the equation Q = mL, L represents:
(a) Length
(b) Specific latent heat
(c) Temperature
(d) None of these
5 The change of a solid into a liquid is called:
(a) Melting
(b) Freezing
(c) Condensation
(d) None of these
6 The change of a liquid into a solid is called:
(a) Vaporization
(b) Sublimation
(c) Freezing
(d) None of these
7 The change of a liquid into a gas is called:
(a) Deposition
(b) Vaporization
(c) Freezing
(d) None of these
8 The change of a gas into a liquid is called:
(a) Sublimation
(b) Melting
(c) Evaporation
(d) None of these
9 The direct change of a solid into a gas is called:
(a) Condensation
(b) Freezing
(c) Sublimation
(d) None of these
10 The direct change of a gas into a solid is called:
(a) Deposition
(b) Vaporization
(c) Melting
(d) None of these
11 The latent heat absorbed per unit mass during melting is called:
(a) Specific heat capacity
(b) Specific latent heat of fusion
(c) Specific latent heat of vaporization
(d) None of these
12 The latent heat absorbed per unit mass during vaporization is called:
(a) Specific latent heat of fusion
(b) Heat capacity
(c) Specific latent heat of vaporization
(d) None of these
13 At standard atmospheric pressure, pure ice melts at:
(a) 0°C
(b) 32°C
(c) 100°C
(d) None of these
14 At standard atmospheric pressure, pure water boils at:
(a) 0°C
(b) 50°C
(c) 100°C
(d) None of these
15 During the melting of pure ice at its melting point under constant pressure, its temperature:
(a) Increases continuously
(b) Remains constant until melting is complete
(c) Decreases continuously
(d) None of these
16 During the boiling of a pure liquid at constant pressure, the temperature:
(a) Always increases rapidly
(b) Always decreases
(c) Remains constant during the phase change
(d) None of these
17 Why does the temperature remain constant during the melting of ice at its melting point?
(a) The heat supplied is used to change the solid structure into liquid
(b) The ice stops absorbing energy
(c) The molecules lose all their kinetic energy
(d) None of these
18 Which phase change releases latent heat to the surroundings?
(a) Melting
(b) Freezing
(c) Vaporization
(d) None of these
19 Which phase change requires the absorption of latent heat?
(a) Condensation
(b) Deposition
(c) Freezing
(d) None of these
20 The approximate specific latent heat of fusion of ice is:
(a) 2,260 kJ kg⁻¹
(b) 334 kJ kg⁻¹
(c) 4.18 kJ kg⁻¹
(d) None of these
21 The approximate specific latent heat of vaporization of water at 100°C and standard atmospheric pressure is:
(a) 334 kJ kg⁻¹
(b) 100 kJ kg⁻¹
(c) 2,260 kJ kg⁻¹
(d) None of these
22 Which requires more energy per kilogram at standard atmospheric pressure?
(a) Melting ice at 0°C
(b) Vaporizing water at 100°C
(c) Both require exactly the same energy
(d) None of these
23 Why does steam at 100°C cause more severe burns than water at 100°C under comparable conditions?
(a) Steam has a lower temperature
(b) Steam has no internal energy
(c) Steam releases additional latent heat when it condenses
(d) None of these
24 Evaporation differs from boiling because evaporation:
(a) Occurs only at the boiling point
(b) Occurs at the surface and can take place below the boiling point
(c) Occurs only inside the liquid
(d) None of these
25 Which factor generally increases the rate of evaporation?
(a) Higher temperature
(b) Lower exposed surface area
(c) Higher humidity
(d) None of these
26 Evaporation causes cooling because:
(a) The fastest molecules preferentially escape from the liquid surface
(b) The liquid gains energy from the surroundings in every case
(c) The mass of each molecule increases
(d) None of these
27 Which condition generally slows evaporation?
(a) Increased airflow
(b) Increased exposed surface area
(c) High relative humidity
(d) None of these
28 Boiling occurs when:
(a) Only surface molecules escape
(b) The vapour pressure of the liquid equals the external pressure
(c) The liquid reaches absolute zero
(d) None of these
29 At high altitudes, water generally boils at a temperature lower than 100°C because:
(a) Atmospheric pressure is lower
(b) Atmospheric pressure is higher
(c) Gravity becomes zero
(d) None of these
30 In a pressure cooker, water boils at a temperature above 100°C because:
(a) The pressure inside is lower than atmospheric pressure
(b) The latent heat of water becomes zero
(c) The pressure inside is higher than atmospheric pressure
(d) None of these
31 Frost formation on a cold surface from water vapour is an example of:
(a) Melting
(b) Deposition
(c) Vaporization
(d) None of these
32 Dry ice changes directly from solid carbon dioxide into gas through:
(a) Condensation
(b) Freezing
(c) Sublimation
(d) None of these
33 A 2 kg sample of ice melts completely at 0°C. If its specific latent heat of fusion is 334 kJ kg⁻¹, the heat required is:
(a) 334 kJ
(b) 668 kJ
(c) 1,002 kJ
(d) None of these
34 How much heat is needed to vaporize 0.5 kg of water at 100°C? Use Lᵥ = 2,260 kJ kg⁻¹.
(a) 565 kJ
(b) 1,130 kJ
(c) 2,260 kJ
(d) None of these
35 A 100 g sample of ice melts at 0°C. Using latent heat of fusion of 334 kJ kg⁻¹, the heat required is:
(a) 3.34 kJ
(b) 16.7 kJ
(c) 33.4 kJ
(d) None of these
36 Which process occurs when water droplets form on the outside of a cold glass?
(a) Evaporation
(b) Sublimation
(c) Condensation
(d) None of these
37 Which statement about the latent heat of fusion is correct?
(a) It is the heat required to change unit mass of a solid into liquid at its melting point without temperature change
(b) It is the heat required to raise the temperature of one kilogram by one kelvin
(c) It is the heat released during a chemical reaction only
(d) None of these
38 Which statement about the latent heat of vaporization is correct?
(a) It is always lower than the latent heat of fusion
(b) It is the energy required to convert unit mass of liquid into gas at the specified boiling condition without temperature change
(c) It measures the change in temperature of a gas
(d) None of these
39 Which of the following is an example of sublimation?
(a) Ice turning into liquid water
(b) Water vapour forming droplets
(c) Solid naphthalene gradually changing into vapour
(d) None of these
40 Which factor affects the boiling point of a liquid?
(a) External pressure
(b) Colour of the container alone
(c) Shape of the liquid surface alone
(d) None of these
41 The heating curve of a pure substance generally shows a horizontal section during:
(a) Temperature increase within a single phase
(b) A phase change at constant pressure
(c) Uniform cooling without a phase change
(d) None of these
42 During condensation, the internal energy of a substance generally:
(a) Decreases as energy is released
(b) Increases because heat is absorbed
(c) Becomes infinite
(d) None of these
43 Which process is responsible for cooling the human body through perspiration?
(a) Condensation
(b) Freezing
(c) Evaporation
(d) None of these
44 Which of the following is an example of latent heat being released?
(a) Ice melting in a glass
(b) Water freezing into ice
(c) Water evaporating from a surface
(d) None of these
45 If 1 kg of a substance requires 500 kJ to change completely from solid to liquid at its melting point, its specific latent heat of fusion is:
(a) 250 kJ kg⁻¹
(b) 500 kJ kg⁻¹
(c) 1,000 kJ kg⁻¹
(d) None of these
46 Which statement about the relationship between melting point and freezing point is correct for a pure substance at a given pressure?
(a) They are generally the same temperature
(b) The melting point is always higher
(c) The freezing point is always higher
(d) None of these
47 Which phase has particles that are generally closely packed and occupy a fixed shape?
(a) Gas
(b) Liquid
(c) Solid
(d) None of these
48 Which phase change occurs when a liquid changes into gas below its boiling point?
(a) Freezing
(b) Evaporation
(c) Condensation
(d) None of these
49 Why does ice at 0°C cool a drink effectively as it melts?
(a) It absorbs latent heat of fusion from the drink
(b) It releases latent heat into the drink
(c) It has no internal energy
(d) None of these
50 Which statement correctly describes latent heat?
(a) It always produces a temperature rise
(b) It is energy associated with a phase change at constant temperature under specified conditions
(c) It is the same as specific heat capacity
(d) None of these
Answer Key
1 (b) A change of state without a temperature change
2 (a) J kg⁻¹
3 (c) Q = mL
4 (b) Specific latent heat
5 (a) Melting
6 (c) Freezing
7 (b) Vaporization
8 (d) None of these
9 (c) Sublimation
10 (a) Deposition
11 (b) Specific latent heat of fusion
12 (c) Specific latent heat of vaporization
13 (a) 0°C
14 (c) 100°C
15 (b) Remains constant until melting is complete
16 (c) Remains constant during the phase change
17 (a) Heat is used to change the solid structure into liquid
18 (b) Freezing
19 (d) None of these
20 (b) 334 kJ kg⁻¹
21 (c) 2,260 kJ kg⁻¹
22 (b) Vaporizing water at 100°C
23 (c) Steam releases additional latent heat when it condenses
24 (b) Occurs at the surface and below the boiling point
25 (a) Higher temperature
26 (a) The fastest molecules preferentially escape
27 (c) High relative humidity
28 (b) Vapour pressure equals external pressure
29 (a) Atmospheric pressure is lower
30 (c) Pressure inside is higher than atmospheric pressure
31 (b) Deposition
32 (c) Sublimation
33 (b) 668 kJ
34 (b) 1,130 kJ
35 (c) 33.4 kJ
36 (c) Condensation
37 (a) Heat required to change unit mass of solid into liquid at its melting point
38 (b) Energy required to convert unit mass of liquid into gas at the specified boiling condition
39 (c) Solid naphthalene changing into vapour
40 (a) External pressure
41 (b) A phase change at constant pressure
42 (a) Decreases as energy is released
43 (c) Evaporation
44 (b) Water freezing into ice
45 (b) 500 kJ kg⁻¹
46 (a) They are generally the same temperature
47 (c) Solid
48 (b) Evaporation
49 (a) It absorbs latent heat of fusion
50 (b) Energy associated with a phase change at constant temperature