General Science – Physics – Alpha, Beta and Gamma Radiation

Alpha, Beta and Gamma Radiation

1. Introduction

Alpha, beta and gamma radiation are three major forms of radiation emitted during radioactive nuclear transformations.

They differ in their physical nature, electric charge, mass, penetrating power, ionizing ability and behaviour in electric and magnetic fields.

Understanding these differences is important in nuclear physics, radiation protection, medical applications and industrial technology.

The three forms of radiation are:

  • Alpha radiation ((\alpha))
  • Beta radiation ((\beta))
  • Gamma radiation ((\gamma))

Although all three can be emitted by unstable nuclei, they are fundamentally different in their physical properties.

2. Alpha Radiation

2.1 Definition

Alpha radiation consists of alpha particles emitted by certain unstable atomic nuclei.

An alpha particle contains:

  • Two protons.
  • Two neutrons.

It is identical to the nucleus of a helium-4 atom.

Its nuclear symbol is:

[
{}^{4}_{2}He
]

An alpha particle has a positive charge of (+2e).

2.2 Properties of Alpha Particles

Property Description
Symbol (\alpha)
Nuclear composition 2 protons and 2 neutrons
Charge (+2e)
Relative charge +2
Mass Approximately 4 u
Nature Helium-4 nucleus
Electric and magnetic field behaviour Deflected towards the negative plate
Ionizing power Very high
Penetrating power Low

Alpha particles are relatively massive and carry two units of positive elementary charge.

2.3 Alpha Decay

During alpha decay, an unstable nucleus emits an alpha particle.

The mass number decreases by four, and the atomic number decreases by two.

The general equation is:

[
{}^{A}{Z}X
\rightarrow
{}^{A-4}
{Z-2}Y
+
{}^{4}_{2}He
]

Example: Uranium-238

[
{}^{238}{92}U
\rightarrow
{}^{234}
{90}Th
+
{}^{4}_{2}He
]

Uranium-238 transforms into thorium-234 by emitting an alpha particle.

2.4 Ionizing Power

Alpha particles have very high ionizing power.

As they travel through matter, they interact strongly with atoms and can remove electrons from them.

This produces a large number of ion pairs over a relatively short distance.

2.5 Penetrating Power

Alpha particles have low penetrating power.

They can generally be stopped by:

  • A sheet of paper.
  • The outer dead layer of human skin.
  • A few centimetres of air, depending on their energy.

Their short range makes them relatively easy to shield against externally.

2.6 Biological Hazard

External alpha exposure is generally less dangerous than exposure to highly penetrating radiation because alpha particles cannot normally penetrate intact outer skin.

However, alpha-emitting radioactive material can be extremely hazardous if inhaled, swallowed or introduced into the body through a wound.

Inside the body, alpha particles can deposit substantial energy in a small region of tissue.

2.7 Applications of Alpha Radiation

Smoke detectors: Americium-241 is used in certain ionization smoke detectors. Its alpha particles ionize air inside the detector, producing a small electrical current. Smoke entering the chamber changes this current and activates the alarm.

Scientific research: Alpha particles are used in nuclear and particle physics experiments.

Targeted alpha therapy: Certain alpha-emitting isotopes are investigated and used in specialized cancer treatments because their high energy deposition over a short range can damage targeted cancer cells.

3. Beta Radiation

3.1 Definition

Beta radiation consists of high-speed electrons or positrons emitted during certain nuclear transformations.

There are two principal types:

  • Beta-minus radiation ((\beta^-)).
  • Beta-plus radiation ((\beta^+)).

3.2 Beta-Minus Particles

A beta-minus particle is an electron emitted from the nucleus during beta-minus decay.

The nuclear process is:

[
n\rightarrow p+e^-+\bar{\nu}_e
]

A neutron changes into a proton and emits an electron and an electron antineutrino.

The emitted electron is not an electron that was previously occupying an atomic orbital. It is produced in the nuclear transformation.

Properties of a beta-minus particle include:

  • Negative electric charge.
  • Very small mass.
  • High speed.
  • Moderate ionizing power.
  • Greater penetrating power than alpha particles.

3.3 Beta-Plus Particles

A beta-plus particle is a positron, which is the antiparticle of the electron.

It has:

  • The same mass as an electron.
  • A positive electric charge.
  • Opposite electric charge to an electron.

Beta-plus decay involves the transformation:

[
p\rightarrow n+e^++\nu_e
]

A positron may later interact with an electron, resulting in annihilation and the production of gamma photons.

3.4 Properties of Beta Radiation

Property Beta-minus Beta-plus
Particle Electron Positron
Charge (-e) (+e)
Mass Electron mass Electron mass
Nuclear change Neutron becomes proton Proton becomes neutron
Atomic number change +1 -1
Mass number change 0 0

3.5 Ionizing Power

Beta particles have moderate ionizing power.

They generally produce less ionization per unit path length than alpha particles but more than gamma rays.

Their ionizing ability depends on their energy and the material through which they travel.

3.6 Penetrating Power

Beta particles have greater penetrating power than alpha particles.

They can pass through paper and thin materials but are often stopped by a suitable thickness of plastic or aluminium.

For beta radiation, plastic or acrylic shielding is often preferred initially because it reduces the production of bremsstrahlung, which is electromagnetic radiation generated when charged particles are decelerated.

High-energy beta sources may require carefully designed shielding.

3.7 Biological Hazard

Beta particles can penetrate the outer dead layer of skin and may cause skin or eye injuries at sufficiently high exposure levels.

Internal exposure can also be hazardous if beta-emitting material is inhaled or swallowed.

3.8 Applications of Beta Radiation

Medical applications: Certain beta-emitting isotopes are used in targeted radiotherapy and treatment of specific medical conditions.

Industrial thickness gauges: Beta radiation can be used to measure the thickness of paper, plastic sheets and thin metal products. The amount of radiation reaching a detector depends on the material’s thickness and density.

Scientific research: Beta particles are studied in nuclear physics and used in various experimental techniques.

Positron emission tomography: PET uses positron-emitting radioactive tracers. The emitted positrons eventually annihilate with electrons, producing pairs of gamma photons that are detected to create medical images.

4. Gamma Radiation

4.1 Definition

Gamma radiation consists of high-energy electromagnetic photons emitted by excited atomic nuclei.

Unlike alpha and beta radiation, gamma rays are not material particles with electric charge.

They are electromagnetic radiation and travel at the speed of light in a vacuum.

4.2 Properties of Gamma Rays

Property Description
Symbol (\gamma)
Nature Electromagnetic photon
Electric charge 0
Rest mass 0
Speed in vacuum (3.0\times10^8,m/s)
Electric and magnetic field behaviour Not deflected
Ionizing power per unit path Generally low compared with alpha and beta
Penetrating power Very high

Gamma rays are often produced when a nucleus loses excess energy after a nuclear transformation.

4.3 Gamma Emission

An excited nucleus can emit gamma radiation to move to a lower energy state.

The general equation is:

[
{}^{A}{Z}X^*
\rightarrow
{}^{A}
{Z}X+\gamma
]

The mass number and atomic number remain unchanged.

Only the nuclear energy state changes.

4.4 Ionizing Power

Gamma rays generally have lower ionizing power per unit path length than alpha particles and beta particles.

However, they are highly penetrating and can interact with matter through processes such as:

  • Photoelectric absorption.
  • Compton scattering.
  • Pair production, when photon energy is sufficiently high.

These interactions can transfer energy to electrons, which may then produce further ionization.

4.5 Penetrating Power

Gamma radiation has high penetrating power.

It can pass through paper, skin and considerable thicknesses of many materials.

Suitable shielding often involves:

  • Thick lead.
  • Concrete.
  • Other dense shielding materials selected according to the photon energy and required protection.

The required shielding thickness depends on the radiation energy, source strength, geometry and acceptable exposure level.

4.6 Biological Hazard

Gamma rays can penetrate the human body and deposit energy in internal tissues.

They can damage cells and DNA.

Their penetrating ability makes external exposure an important radiation protection concern.

4.7 Applications of Gamma Radiation

Cancer radiotherapy: Gamma radiation can be used to damage cancer cells and control tumour growth.

Medical sterilization: Gamma radiation is used to sterilize certain medical devices and equipment.

Industrial radiography: Gamma rays can inspect the internal structure of metal components, welds and pipelines.

Medical imaging: Gamma-emitting radionuclides are used in nuclear medicine imaging, including procedures involving gamma cameras.

Food irradiation: Gamma radiation can reduce harmful microorganisms in selected food products when properly regulated.

Scientific research: Gamma spectroscopy helps scientists investigate nuclear energy levels and identify radioactive isotopes.

5. Comparison of Alpha, Beta and Gamma Radiation

The following table summarizes the principal differences.

Property Alpha Beta Gamma
Nature Helium-4 nucleus Electron or positron Electromagnetic photon
Symbol (\alpha) (\beta^-) or (\beta^+) (\gamma)
Charge +2e -e or +e 0
Rest mass About 4 u Electron mass 0
Speed Less than light speed Can approach light speed Light speed in vacuum
Ionizing power Very high Moderate Generally low per unit path
Penetrating power Low Moderate Very high
Deflection in electric field Towards negative plate Direction depends on charge None
Deflection in magnetic field Yes, relatively small Yes, relatively large None
Typical shielding Paper or skin Plastic or aluminium Lead or concrete
Effect on mass number Decreases by 4 Unchanged Unchanged
Effect on atomic number Decreases by 2 Changes by 1 Unchanged

The table gives general comparisons. Actual penetration, ionization and shielding requirements depend on radiation energy and the materials involved.

6. Ionizing Power and Penetrating Power

These are two important concepts that are frequently confused.

6.1 Ionizing Power

Ionizing power refers to the ability of radiation to remove electrons from atoms or molecules.

Alpha particles have high ionizing power because they carry a relatively large electric charge and interact strongly with matter.

Beta particles have moderate ionizing power.

Gamma rays generally produce less ionization per unit path length, although they can cause significant ionization through secondary electrons.

The usual qualitative order is:

[
\alpha>\beta>\gamma
]

This is a general comparison, not a universal numerical rule for every radiation energy and material.

6.2 Penetrating Power

Penetrating power refers to the ability of radiation to pass through matter.

The usual qualitative order is:

[
\gamma>\beta>\alpha
]

Gamma radiation is the most penetrating of these three forms, while alpha radiation has the shortest range in most ordinary materials.

6.3 Why Are the Orders Different?

Alpha particles strongly interact with matter and lose their energy quickly, producing intense ionization over a short distance.

Gamma rays interact less frequently along a given path and can travel much farther through matter before being absorbed or scattered.

Beta particles have intermediate behaviour.

7. Deflection in Electric and Magnetic Fields

Charged particles experience forces in electric and magnetic fields.

7.1 Alpha Particles

Alpha particles have a positive charge of (+2e).

In an electric field, they are deflected towards the negative plate.

Their relatively large mass means that their deflection is generally smaller than that of beta particles under comparable conditions.

7.2 Beta Particles

Beta-minus particles carry a negative charge, so they are deflected towards the positive plate.

Beta-plus particles carry a positive charge and are deflected towards the negative plate.

Because beta particles have a very small mass, their deflection can be much greater than that of alpha particles under comparable field conditions.

7.3 Gamma Rays

Gamma rays have no electric charge.

They are not deflected by ordinary electric or magnetic fields.

8. Nuclear Equations for Alpha, Beta and Gamma Radiation

8.1 Alpha Decay

[
{}^{238}{92}U
\rightarrow
{}^{234}
{90}Th+
{}^{4}_{2}He
]

The atomic number decreases by two and mass number decreases by four.

8.2 Beta-Minus Decay

[
{}^{14}{6}C
\rightarrow
{}^{14}
{7}N+
{}^{0}_{-1}e+
\bar{\nu}_e
]

The atomic number increases by one and mass number remains unchanged.

8.3 Beta-Plus Decay

[
{}^{22}{11}Na
\rightarrow
{}^{22}
{10}Ne+
{}^{0}_{+1}e+
\nu_e
]

The atomic number decreases by one and mass number remains unchanged.

8.4 Gamma Emission

[
{}^{99m}{43}Tc
\rightarrow
{}^{99}
{43}Tc+\gamma
]

The atomic number and mass number remain unchanged.

The notation (99m) indicates a metastable excited nuclear state.

9. Gamma-Ray Attenuation

Gamma rays lose intensity as they pass through matter because some photons are absorbed or scattered.

For a narrow beam under suitable conditions, the attenuation law is:

[
I=I_0e^{-\mu x}
]

Where:

  • (I) = transmitted intensity.
  • (I_0) = initial intensity.
  • (\mu) = linear attenuation coefficient.
  • (x) = thickness of the absorbing material.

The attenuation coefficient depends on the photon energy and the absorbing material.

9.1 Worked Example

A narrow gamma-ray beam has an initial intensity of 1,000 units. After passing through a shielding material, its intensity becomes 250 units.

Find the fraction of intensity transmitted.

Solution:

[
\text{Fraction transmitted}=\frac{250}{1000}
]

[
=0.25
]

Therefore:

[
\boxed{25%}
]

The material has reduced the measured intensity to one-quarter of its original value.

This example illustrates attenuation without requiring a specific shielding material or attenuation coefficient.

10. Biological Effects and Radiation Safety

All three forms of radiation can be harmful under appropriate exposure conditions.

The level of risk depends on:

  • Radiation type.
  • Energy of radiation.
  • Exposure duration.
  • Distance from the source.
  • Shielding.
  • Whether radioactive material enters the body.
  • The sensitivity of the exposed tissue.

10.1 External Exposure

External exposure occurs when radiation reaches the body from a source outside it.

Gamma radiation is an important external hazard because of its high penetrating power.

Beta radiation can also cause external skin and eye injuries.

Alpha radiation is usually unable to penetrate intact outer skin, making external exposure less hazardous in ordinary circumstances.

10.2 Internal Exposure

Internal exposure occurs when radioactive material enters the body through inhalation, ingestion, injection or wounds.

Alpha-emitting material can be particularly dangerous internally because alpha particles deposit substantial energy over a short distance.

Beta and gamma emitters can also present serious internal hazards, depending on their distribution, energy and biological behaviour.

11. Radiation Shielding

Different types of radiation require different shielding materials.

11.1 Alpha Shielding

Alpha particles can be stopped by:

  • Paper.
  • Thin plastic.
  • The outer dead layer of intact skin.

However, shielding alone is not sufficient when radioactive contamination is possible. Preventing inhalation and ingestion is essential.

11.2 Beta Shielding

Beta particles are commonly shielded using:

  • Plastic.
  • Acrylic.
  • Suitable thicknesses of aluminium.

Low-atomic-number materials are often used first to reduce bremsstrahlung production.

11.3 Gamma Shielding

Gamma radiation requires more substantial shielding.

Common materials include:

  • Lead.
  • Concrete.
  • Other dense materials selected according to the energy and exposure conditions.

Greater shielding thickness generally reduces the transmitted intensity.

11.4 General Radiation Protection

The three fundamental protection measures are:

  1. Minimize exposure time.
  2. Maximize distance from the source.
  3. Use suitable shielding.

Radiation workers also use monitoring instruments, controlled

5 Views