MCQs – Physics – Thermal Expansion of Solids, Liquids and Gases

Thermal Expansion of Solids, Liquids and Gases

Multiple-Choice Questions

1 Thermal expansion refers to:
(a) Increase in mass due to heating
(b) Increase in dimensions due to a rise in temperature
(c) Decrease in density due to cooling
(d) None of these

2 Which state of matter generally exhibits the greatest thermal expansion?
(a) Solids
(b) Liquids
(c) Gases
(d) None of these

3 The coefficient of linear expansion describes the change in:
(a) Length per unit original length per unit temperature change
(b) Volume per unit mass
(c) Density per unit pressure
(d) None of these

4 The SI unit of the coefficient of linear expansion is:
(a) Metre
(b) Square metre
(c) Kelvin per metre
(d) None of these

5 When a metal rod is heated uniformly, its length generally:
(a) Decreases
(b) Increases
(c) Remains exactly unchanged
(d) None of these

6 For an isotropic solid, the coefficient of volume expansion is approximately:
(a) Three times the coefficient of linear expansion
(b) Twice the coefficient of linear expansion
(c) Half the coefficient of linear expansion
(d) None of these

7 For an isotropic solid, the coefficient of area expansion is approximately:
(a) Three times the linear expansion coefficient
(b) Half the linear expansion coefficient
(c) Twice the linear expansion coefficient
(d) None of these

8 Which formula represents linear thermal expansion?
(a) ΔL = αL₀ΔT
(b) ΔL = L₀/(αΔT)
(c) ΔL = α/(L₀ΔT)
(d) None of these

9 In the linear expansion formula, α represents:
(a) Initial length
(b) Temperature change
(c) Coefficient of linear expansion
(d) None of these

10 Railway tracks are provided with expansion gaps mainly to:
(a) Reduce their weight
(b) Allow thermal expansion
(c) Increase friction
(d) None of these

11 Bridges often contain expansion joints because:
(a) Concrete and steel can expand or contract with temperature changes
(b) Bridges must remain permanently cold
(c) Expansion joints prevent all vibrations
(d) None of these

12 Which material generally has a relatively high coefficient of linear expansion?
(a) Invar
(b) Ordinary glass
(c) Aluminium
(d) None of these

13 Which alloy is known for its very low coefficient of thermal expansion?
(a) Brass
(b) Invar
(c) Aluminium
(d) None of these

14 A bimetallic strip bends on heating because:
(a) Both metals melt at different temperatures
(b) Both metals become magnetic
(c) The two metals expand by different amounts
(d) None of these

15 Which device commonly uses a bimetallic strip?
(a) Thermostat
(b) Barometer
(c) Hydrometer
(d) None of these

16 When a metal plate with a hole is heated uniformly, the hole generally:
(a) Becomes smaller
(b) Becomes larger
(c) Remains exactly the same size
(d) None of these

17 The expansion of a liquid is usually measured using:
(a) Linear expansion only
(b) Area expansion only
(c) Volume expansion
(d) None of these

18 The apparent expansion of a liquid in a container is:
(a) Equal to the liquid’s real expansion
(b) Less than the liquid’s real expansion
(c) Greater than the liquid’s real expansion
(d) None of these

19 The apparent expansion of a liquid is generally:
(a) The real expansion of the liquid minus the expansion of the container
(b) The expansion of the container minus the real expansion of the liquid
(c) The sum of the real expansions of liquid and container
(d) None of these

20 Water exhibits anomalous expansion between:
(a) 0°C and 4°C
(b) 4°C and 10°C
(c) 10°C and 20°C
(d) None of these

21 The density of pure water is approximately maximum at:
(a) 0°C
(b) 4°C
(c) 100°C
(d) None of these

22 When water is heated from 0°C to 4°C at atmospheric pressure, its volume:
(a) Increases
(b) Remains constant
(c) Decreases
(d) None of these

23 When water is cooled from 4°C to 0°C, its volume:
(a) Increases
(b) Decreases
(c) Becomes zero
(d) None of these

24 Which phenomenon helps lakes and ponds freeze from the surface rather than from the bottom under ordinary winter conditions?
(a) Water has maximum density at 0°C
(b) Water becomes densest at 4°C, so colder water near the surface remains above it
(c) Ice is denser than liquid water
(d) None of these

25 The coefficient of volume expansion of a liquid is generally:
(a) Smaller than that of a solid
(b) Always zero
(c) Greater than that of a solid
(d) None of these

26 Gases generally expand significantly when:
(a) Their temperature increases at constant pressure
(b) Their temperature decreases at constant pressure
(c) Their pressure increases at constant temperature
(d) None of these

27 Charles’s law states that, at constant pressure, the volume of a fixed amount of gas is directly proportional to its:
(a) Pressure
(b) Absolute temperature
(c) Density
(d) None of these

28 According to the ideal gas law, the relationship among pressure, volume, amount of gas and absolute temperature is:
(a) PV = nRT
(b) P = nVRT
(c) PT = nRV
(d) None of these

29 At constant volume, the pressure of a fixed amount of an ideal gas is directly proportional to its:
(a) Celsius temperature
(b) Mass density only
(c) Absolute temperature
(d) None of these

30 A gas expands at constant pressure when heated because:
(a) Its molecules become heavier
(b) Its volume increases with absolute temperature
(c) Its number of molecules automatically increases
(d) None of these

31 Which law describes the inverse relationship between pressure and volume of a fixed amount of gas at constant temperature?
(a) Boyle’s law
(b) Charles’s law
(c) Avogadro’s law
(d) None of these

32 A gas occupies 2 litres at a certain temperature and pressure. If its absolute temperature doubles at constant pressure, its volume becomes:
(a) 1 litre
(b) 2 litres
(c) 4 litres
(d) None of these

33 A metal rod of length 2 m has a linear expansion coefficient of 1 × 10⁻⁵ K⁻¹. If its temperature rises by 50 K, its increase in length is:
(a) 0.1 mm
(b) 1 mm
(c) 10 mm
(d) None of these

34 A 1 m rod expands by 0.5 mm when its temperature rises by 50 K. Its coefficient of linear expansion is:
(a) 1 × 10⁻⁵ K⁻¹
(b) 1 × 10⁻⁴ K⁻¹
(c) 5 × 10⁻⁵ K⁻¹
(d) None of these

35 Which of the following is a practical application of thermal expansion?
(a) Liquid-in-glass thermometers
(b) Nuclear fission
(c) Radioactive dating
(d) None of these

36 Overhead electrical wires are installed with some sag mainly because:
(a) Their electrical resistance must be zero
(b) They contract in hot weather
(c) They expand in hot weather and contract in cold weather
(d) None of these

37 A metal lid on a glass jar may loosen when heated because:
(a) The glass always expands more than the metal
(b) The metal lid may expand and increase its diameter
(c) The mass of the lid decreases
(d) None of these

38 The expansion of solids is generally smallest in:
(a) Length for every material
(b) Volume for every material
(c) Area for every material
(d) None of these

39 The coefficient of thermal expansion depends mainly on:
(a) The nature of the material and temperature range
(b) The object’s colour alone
(c) The object’s shape alone
(d) None of these

40 When a solid is heated uniformly and freely, its density generally:
(a) Increases
(b) Decreases
(c) Remains exactly constant
(d) None of these

41 Why are expansion joints used in concrete roads?
(a) To allow thermal expansion and contraction
(b) To increase the road’s mass
(c) To prevent all water evaporation
(d) None of these

42 Which material is commonly used in precision instruments where minimal thermal expansion is desirable?
(a) Aluminium
(b) Brass
(c) Invar
(d) None of these

43 The volume expansion of an ideal gas at constant pressure is governed by:
(a) Boyle’s law
(b) Charles’s law
(c) Ohm’s law
(d) None of these

44 A liquid’s real expansion is determined after accounting for:
(a) The expansion of the container
(b) Atmospheric humidity
(c) The mass of the container alone
(d) None of these

45 When a liquid is heated in a vessel, its observed level may initially fall because:
(a) The liquid contracts permanently
(b) The liquid loses mass
(c) The vessel expands before the liquid’s expansion becomes noticeable
(d) None of these

46 Which of the following is not a usual consequence of thermal expansion?
(a) Expansion of railway tracks
(b) Bending of bimetallic strips
(c) Expansion of a heated metal rod
(d) None of these

47 If the temperature of a freely expanding isotropic solid increases, its volume generally:
(a) Increases
(b) Decreases
(c) Becomes zero
(d) None of these

48 A hole in a metal ring has a diameter of 10 mm. After uniform heating, the diameter becomes:
(a) Less than 10 mm
(b) Greater than 10 mm
(c) Exactly zero
(d) None of these

49 Which statement about thermal expansion is correct?
(a) All substances expand at exactly the same rate
(b) Gases do not expand when heated
(c) Different materials have different thermal expansion coefficients
(d) None of these

50 The main reason a mercury thermometer works is that mercury:
(a) Has no volume
(b) Expands predictably with temperature over its working range
(c) Becomes a gas at room temperature
(d) None of these

Answer Key

1 (b) Increase in dimensions due to a rise in temperature
2 (c) Gases
3 (a) Length per unit original length per unit temperature change
4 (d) None of these
5 (b) Increases
6 (a) Three times the coefficient of linear expansion
7 (c) Twice the linear expansion coefficient
8 (a) ΔL = αL₀ΔT
9 (c) Coefficient of linear expansion
10 (b) Allow thermal expansion
11 (a) Concrete and steel can expand or contract
12 (c) Aluminium
13 (b) Invar
14 (c) The two metals expand by different amounts
15 (a) Thermostat
16 (b) Becomes larger
17 (c) Volume expansion
18 (b) Less than the liquid’s real expansion
19 (a) Real expansion minus container expansion
20 (a) 0°C and 4°C
21 (b) 4°C
22 (c) Decreases
23 (a) Increases
24 (b) Water becomes densest at 4°C
25 (c) Greater than that of a solid
26 (a) Temperature increases at constant pressure
27 (b) Absolute temperature
28 (a) PV = nRT
29 (c) Absolute temperature
30 (b) Its volume increases with absolute temperature
31 (a) Boyle’s law
32 (c) 4 litres
33 (b) 1 mm
34 (a) 1 × 10⁻⁵ K⁻¹
35 (a) Liquid-in-glass thermometers
36 (c) They expand in hot weather and contract in cold weather
37 (b) The metal lid may expand and increase its diameter
38 (d) None of these
39 (a) Nature of the material and temperature range
40 (b) Decreases
41 (a) Allow thermal expansion and contraction
42 (c) Invar
43 (b) Charles’s law
44 (a) Expansion of the container
45 (c) The vessel expands first
46 (d) None of these
47 (a) Increases
48 (b) Greater than 10 mm
49 (c) Different materials have different thermal expansion coefficients
50 (b) Expands predictably with temperature

5 Views