MCQs – Physics – Specific Heat Capacity and Calorimetry

Specific Heat Capacity and Calorimetry

Multiple-Choice Questions

1 Specific heat capacity is the amount of heat required to raise the temperature of:
(a) A body by 10°C
(b) One kilogram of a substance by one kelvin
(c) One gram of any substance by 100°C
(d) None of these

2 The SI unit of specific heat capacity is:
(a) J kg⁻¹ K⁻¹
(b) J kg⁻¹
(c) W m⁻¹ K⁻¹
(d) None of these

3 Which formula is used to calculate heat absorbed or released when temperature changes without a phase change?
(a) Q = m/cΔT
(b) Q = mc/ΔT
(c) Q = mcΔT
(d) None of these

4 In the equation Q = mcΔT, the symbol c represents:
(a) Heat energy
(b) Specific heat capacity
(c) Temperature change
(d) None of these

5 Which substance has a relatively high specific heat capacity?
(a) Copper
(b) Iron
(c) Water
(d) None of these

6 The approximate specific heat capacity of liquid water is:
(a) 4,180 J kg⁻¹ K⁻¹
(b) 420 J kg⁻¹ K⁻¹
(c) 900 J kg⁻¹ K⁻¹
(d) None of these

7 A substance with a high specific heat capacity requires:
(a) Less heat to produce a given temperature rise in a fixed mass
(b) More heat to produce a given temperature rise in a fixed mass
(c) No heat to change its temperature
(d) None of these

8 Why do coastal regions often experience smaller daily temperature variations than inland regions?
(a) Sea water has a high specific heat capacity
(b) Sea water has no thermal energy
(c) Land cannot absorb heat
(d) None of these

9 Which quantity is directly proportional to the heat absorbed by a substance when its mass and specific heat capacity are constant?
(a) Pressure
(b) Density
(c) Temperature change
(d) None of these

10 If the mass of a substance is doubled while the specific heat capacity and temperature change remain constant, the heat required:
(a) Doubles
(b) Halves
(c) Remains unchanged
(d) None of these

11 If the specific heat capacity of a substance is doubled while mass and temperature change remain constant, the heat required:
(a) Halves
(b) Doubles
(c) Becomes zero
(d) None of these

12 A 2 kg sample absorbs 4,000 J of heat and its temperature rises by 2 K. Its specific heat capacity is:
(a) 500 J kg⁻¹ K⁻¹
(b) 1,000 J kg⁻¹ K⁻¹
(c) 2,000 J kg⁻¹ K⁻¹
(d) None of these

13 How much heat is required to raise the temperature of 1 kg of water by 10 K, using c = 4,200 J kg⁻¹ K⁻¹?
(a) 4,200 J
(b) 10,000 J
(c) 42,000 J
(d) None of these

14 A 500 g sample of a substance with specific heat capacity 400 J kg⁻¹ K⁻¹ is heated by 20 K. The heat supplied is:
(a) 4,000 J
(b) 8,000 J
(c) 400 J
(d) None of these

15 Which device is commonly used to measure heat exchange in a laboratory?
(a) Barometer
(b) Calorimeter
(c) Ammeter
(d) None of these

16 Calorimetry is the science of measuring:
(a) Electric current
(b) Atmospheric pressure
(c) Heat transferred
(d) None of these

17 In an ideal isolated calorimetry experiment, the heat lost by a hotter body is:
(a) Equal to the heat gained by the colder body
(b) Always greater than the heat gained
(c) Always less than the heat gained
(d) None of these

18 The principle of calorimetry is based on the:
(a) Conservation of mass only
(b) Conservation of electric charge
(c) Conservation of energy
(d) None of these

19 A calorimeter is commonly designed with insulating walls to:
(a) Increase heat loss to the surroundings
(b) Minimise unwanted heat exchange with the surroundings
(c) Prevent temperature measurement
(d) None of these

20 Which material is often used in a simple calorimeter because of its relatively low specific heat capacity?
(a) Copper
(b) Water
(c) Ice
(d) None of these

21 If a hot metal object is placed in cooler water inside an insulated calorimeter, the final equilibrium temperature is generally:
(a) Below the initial water temperature
(b) Above the initial metal temperature
(c) Between the initial temperatures
(d) None of these

22 A 1 kg object absorbs 600 J of heat and its temperature rises by 3 K. Its heat capacity is:
(a) 200 J K⁻¹
(b) 600 J K⁻¹
(c) 1,800 J K⁻¹
(d) None of these

23 Heat capacity differs from specific heat capacity because heat capacity:
(a) Is always measured per kilogram
(b) Refers to a whole body rather than per unit mass
(c) Has no relationship with temperature change
(d) None of these

24 The SI unit of heat capacity is:
(a) J kg⁻¹ K⁻¹
(b) W K⁻¹
(c) J K⁻¹
(d) None of these

25 A 2 kg body has a specific heat capacity of 500 J kg⁻¹ K⁻¹. Its heat capacity is:
(a) 250 J K⁻¹
(b) 500 J K⁻¹
(c) 2,500 J K⁻¹
(d) None of these

26 Which substance generally requires the least heat to raise the temperature of equal masses by the same amount?
(a) Water
(b) Copper
(c) Liquid water
(d) None of these

27 A 100 g sample of water is heated from 20°C to 30°C. Using c = 4.2 J g⁻¹ °C⁻¹, the heat absorbed is:
(a) 420 J
(b) 840 J
(c) 4,200 J
(d) None of these

28 If a body releases heat and its temperature decreases without a phase change, the value of Q for the body is conventionally:
(a) Negative
(b) Positive
(c) Always zero
(d) None of these

29 Which factor does not appear directly in the simple equation Q = mcΔT?
(a) Mass
(b) Specific heat capacity
(c) Temperature change
(d) None of these

30 Which of the following is an application of water’s high specific heat capacity?
(a) Water-based cooling systems in engines
(b) Making metals electrically conductive
(c) Increasing the speed of sound in a vacuum
(d) None of these

31 The specific heat capacity of a substance may vary with:
(a) Temperature
(b) The substance’s colour alone
(c) Its geographical location alone
(d) None of these

32 When equal masses of two substances absorb equal amounts of heat, the substance with the lower specific heat capacity experiences:
(a) A smaller temperature rise
(b) A larger temperature rise
(c) No temperature change
(d) None of these

33 A 2 kg substance with specific heat capacity 300 J kg⁻¹ K⁻¹ is heated by 5 K. The heat supplied is:
(a) 300 J
(b) 1,500 J
(c) 3,000 J
(d) None of these

34 A body receives 12,000 J of heat and its temperature increases by 20 K. Its heat capacity is:
(a) 600 J K⁻¹
(b) 1,200 J K⁻¹
(c) 2,400 J K⁻¹
(d) None of these

35 Which statement about water as a coolant is correct?
(a) It has a very low specific heat capacity
(b) It can absorb considerable heat with a relatively small temperature rise
(c) It cannot transfer heat
(d) None of these

36 In a mixture of hot and cold water in an insulated container, the final temperature depends on:
(a) The masses and initial temperatures of the water
(b) The colour of the container only
(c) The shape of the container only
(d) None of these

37 A 100 g metal sample at 100°C is placed in 100 g water at 20°C in an ideal insulated calorimeter. The final temperature is 30°C. The specific heat capacity of the metal is approximately:
(a) 600 J kg⁻¹ K⁻¹
(b) 300 J kg⁻¹ K⁻¹
(c) 4,200 J kg⁻¹ K⁻¹
(d) None of these

38 Which statement about the specific heat capacity of a substance is correct?
(a) It is the same for all substances
(b) It is independent of the nature of the substance
(c) It is a characteristic thermal property of the material under specified conditions
(d) None of these

39 If 5,000 J of heat raises the temperature of 2 kg of a material by 5 K, its specific heat capacity is:
(a) 250 J kg⁻¹ K⁻¹
(b) 500 J kg⁻¹ K⁻¹
(c) 1,000 J kg⁻¹ K⁻¹
(d) None of these

40 Which process is studied through calorimetry?
(a) Determining the heat released in a chemical reaction
(b) Measuring the mass of a planet
(c) Measuring the wavelength of light only
(d) None of these

41 Which condition is assumed in the simplest heat-exchange problems involving two bodies?
(a) No energy is conserved
(b) No heat is exchanged with the surroundings
(c) Both bodies have zero mass
(d) None of these

42 A 1 kg sample with specific heat capacity 800 J kg⁻¹ K⁻¹ cools by 10 K. The magnitude of heat released is:
(a) 800 J
(b) 8,000 J
(c) 80,000 J
(d) None of these

43 Why does sand become hotter than seawater during a sunny day under comparable conditions?
(a) Sand always receives more sunlight
(b) Water has no heat capacity
(c) Sand generally has a lower specific heat capacity than water
(d) None of these

44 Which statement correctly describes the relationship between heat capacity and mass for a uniform substance?
(a) Heat capacity is proportional to mass
(b) Heat capacity is inversely proportional to mass
(c) Heat capacity is always independent of mass
(d) None of these

45 A 250 g substance with specific heat capacity 800 J kg⁻¹ K⁻¹ absorbs 1,600 J. Its temperature rise is:
(a) 4 K
(b) 8 K
(c) 16 K
(d) None of these

46 Which of the following is not a unit of specific heat capacity?
(a) J kg⁻¹ K⁻¹
(b) J g⁻¹ °C⁻¹
(c) cal g⁻¹ °C⁻¹
(d) None of these

47 In a calorimetry experiment, a thermometer should be used to determine:
(a) The change in temperature of the system
(b) The mass of the sample
(c) The pressure of the atmosphere
(d) None of these

48 The heat capacity of an object is 100 J K⁻¹. How much heat is required to raise its temperature by 5 K?
(a) 20 J
(b) 500 J
(c) 1,000 J
(d) None of these

49 If the temperature change is zero and no phase change occurs, the heat transferred in the simple relation Q = mcΔT is:
(a) Zero
(b) Equal to the mass
(c) Equal to the specific heat capacity
(d) None of these

50 Which principle is essential for solving ideal calorimetry problems?
(a) Conservation of momentum
(b) Conservation of charge
(c) Conservation of energy
(d) None of these

Answer Key

1 (b) One kilogram of a substance by one kelvin
2 (a) J kg⁻¹ K⁻¹
3 (c) Q = mcΔT
4 (b) Specific heat capacity
5 (c) Water
6 (a) 4,180 J kg⁻¹ K⁻¹
7 (b) More heat to produce a given temperature rise
8 (a) Sea water has a high specific heat capacity
9 (c) Temperature change
10 (a) Doubles
11 (b) Doubles
12 (b) 1,000 J kg⁻¹ K⁻¹
13 (c) 42,000 J
14 (a) 4,000 J
15 (b) Calorimeter
16 (c) Heat transferred
17 (a) Equal to the heat gained by the colder body
18 (c) Conservation of energy
19 (b) Minimise unwanted heat exchange
20 (a) Copper
21 (c) Between the initial temperatures
22 (a) 200 J K⁻¹
23 (b) Refers to a whole body rather than per unit mass
24 (c) J K⁻¹
25 (d) None of these
26 (b) Copper
27 (a) 420 J
28 (a) Negative
29 (d) None of these
30 (a) Water-based cooling systems in engines
31 (a) Temperature
32 (b) A larger temperature rise
33 (c) 3,000 J
34 (a) 600 J K⁻¹
35 (b) It can absorb considerable heat with a relatively small temperature rise
36 (a) The masses and initial temperatures of the water
37 (b) 300 J kg⁻¹ K⁻¹
38 (c) A characteristic thermal property under specified conditions
39 (b) 500 J kg⁻¹ K⁻¹
40 (a) Determining heat released in a chemical reaction
41 (b) No heat is exchanged with the surroundings
42 (b) 8,000 J
43 (c) Sand generally has a lower specific heat capacity than water
44 (a) Heat capacity is proportional to mass
45 (b) 8 K
46 (d) None of these
47 (a) The change in temperature of the system
48 (b) 500 J
49 (a) Zero
50 (c) Conservation of energy

6 Views