General Science – Physics – Radioactivity and Types of Nuclear Radiation

Radioactivity and Types of Nuclear Radiation

1. Introduction

Radioactivity is the spontaneous transformation of unstable atomic nuclei accompanied by the emission of particles or electromagnetic radiation.

An unstable nucleus may release energy and change into another nuclear state or a different nuclide. These transformations are called radioactive decays.

Radioactivity is a fundamental topic in nuclear physics and has applications in medicine, electricity generation, industrial testing, agriculture, archaeology and scientific research.

Understanding radioactivity also requires knowledge of radiation hazards, radioactive decay rates, half-life and radiation protection.

2. Discovery of Radioactivity

2.1 Henri Becquerel

In 1896, French physicist Henri Becquerel discovered natural radioactivity while investigating uranium compounds.

He observed that uranium salts could expose photographic plates even when the plates were protected from ordinary light.

This indicated that uranium emitted penetrating radiation without requiring external illumination.

The phenomenon became known as radioactivity.

2.2 Marie and Pierre Curie

Marie Curie and Pierre Curie carried out extensive investigations of radioactive materials.

Their research led to the discovery of two radioactive elements:

  • Polonium, discovered in 1898.
  • Radium, discovered in 1898.

Marie Curie made major contributions to the scientific understanding of radioactivity and helped establish it as a distinct field of research.

The word radioactivity is associated with the work of Marie Curie and her scientific investigations.

2.3 Other Important Contributors

Ernest Rutherford investigated radioactive transformations and classified important forms of radiation.

He identified alpha and beta radiation, while Paul Villard discovered gamma radiation in 1900.

These discoveries helped establish the major categories of nuclear radiation.

3. What Causes Radioactivity?

3.1 Nuclear Instability

The nucleus contains positively charged protons and electrically neutral neutrons.

Protons repel one another because they carry like electric charges. The strong nuclear interaction provides the attractive binding that holds nucleons together at very short distances.

A nucleus is stable when its structure and energy arrangement allow it to remain in a stable nuclear state.

Some nuclei are unstable and can transform into more stable configurations by releasing energy.

3.2 Factors Affecting Nuclear Stability

Nuclear stability depends on several factors.

Neutron-to-proton ratio: Stable nuclei require an appropriate balance between neutrons and protons. The preferred ratio varies with nuclear size.

Nuclear size: Very heavy nuclei may become unstable because the electrostatic repulsion between many protons becomes increasingly important.

Nuclear energy: A nucleus may release energy by moving towards a more energetically favourable configuration.

Nuclear structure: Particular arrangements of protons and neutrons can produce especially stable nuclei.

Radioactive decay is governed by nuclear physics and is not simply caused by an atom being chemically reactive.

4. Basic Terms in Radioactive Decay

4.1 Parent Nuclide

The original unstable nucleus that undergoes radioactive decay is called the parent nuclide.

4.2 Daughter Nuclide

The nucleus produced after radioactive decay is called the daughter nuclide.

The daughter may be stable or may itself be radioactive.

4.3 Nuclear Transformation

A radioactive decay can change the number of protons, neutrons or the energy state of a nucleus.

If the proton number changes, the element changes into another element. This process is called nuclear transmutation.

4.4 Radioactive Emission

Radioactive nuclei may emit:

  • Alpha particles.
  • Beta-minus particles.
  • Beta-plus particles.
  • Gamma photons.
  • Neutrons in certain nuclear processes.

Some radioactive transformations also involve neutrinos or antineutrinos.

5. Main Types of Radioactive Decay

5.1 Alpha Decay

Alpha decay occurs when an unstable nucleus emits an alpha particle.

An alpha particle consists of two protons and two neutrons. It is identical to the nucleus of a helium-4 atom.

Its nuclear symbol is:

[
{}^{4}_{2}He
]

During alpha decay:

  • The mass number decreases by four.
  • The atomic number decreases by two.

The general equation is:

[
{}^{A}{Z}X
\rightarrow
{}^{A-4}
{Z-2}Y
+
{}^{4}_{2}He
]

Example: Uranium-238 decay

[
{}^{238}{92}U
\rightarrow
{}^{234}
{90}Th
+
{}^{4}_{2}He
]

Uranium-238 becomes thorium-234 by emitting an alpha particle.

5.2 Beta-Minus Decay

Beta-minus decay occurs when a neutron in the nucleus transforms into a proton.

During this process, an electron and an electron antineutrino are emitted.

The nuclear transformation is:

[
n\rightarrow p+e^-+\bar{\nu}_e
]

Where:

  • (n) = neutron.
  • (p) = proton.
  • (e^-) = electron.
  • (\bar{\nu}_e) = electron antineutrino.

During beta-minus decay:

  • The mass number remains unchanged.
  • The atomic number increases by one.

The general equation is:

[
{}^{A}{Z}X
\rightarrow
{}^{A}
{Z+1}Y
+
{}^{0}_{-1}e
+
\bar{\nu}_e
]

Example: Carbon-14 decay

[
{}^{14}{6}C
\rightarrow
{}^{14}
{7}N
+
{}^{0}_{-1}e
+
\bar{\nu}_e
]

Carbon-14 becomes nitrogen-14.

5.3 Beta-Plus Decay

Beta-plus decay, also called positron emission, occurs when a proton transforms into a neutron.

A positron and an electron neutrino are emitted.

The process is:

[
p\rightarrow n+e^++\nu_e
]

Where:

  • (p) = proton.
  • (n) = neutron.
  • (e^+) = positron.
  • (\nu_e) = electron neutrino.

During beta-plus decay:

  • The mass number remains unchanged.
  • The atomic number decreases by one.

The general equation is:

[
{}^{A}{Z}X
\rightarrow
{}^{A}
{Z-1}Y
+
{}^{0}_{+1}e
+
\nu_e
]

A positron has the same mass as an electron but carries a positive electric charge.

5.4 Electron Capture

Electron capture occurs when a proton in the nucleus captures an inner-shell electron and transforms into a neutron.

The process is:

[
p+e^-\rightarrow n+\nu_e
]

During electron capture:

  • The mass number remains unchanged.
  • The atomic number decreases by one.

The general nuclear equation is:

[
{}^{A}{Z}X+{}^{0}{-1}e
\rightarrow
{}^{A}_{Z-1}Y+\nu_e
]

Electron capture can leave an electron vacancy in an inner shell. When another electron fills that vacancy, characteristic X-rays or Auger electrons may be produced.

5.5 Gamma Emission

Gamma emission occurs when an excited nucleus releases excess energy in the form of a high-energy photon.

The atomic number and mass number remain unchanged.

The general equation is:

[
{}^{A}{Z}X^*
\rightarrow
{}^{A}
{Z}X+\gamma
]

The asterisk indicates an excited nuclear state.

Gamma emission changes the energy state of the nucleus but does not change its elemental identity.

6. Summary of Nuclear Changes

Decay process Nuclear transformation Change in mass number Change in atomic number
Alpha Emits 2 protons and 2 neutrons -4 -2
Beta-minus Neutron becomes proton 0 +1
Beta-plus Proton becomes neutron 0 -1
Electron capture Proton captures electron and becomes neutron 0 -1
Gamma Excited nucleus releases photon 0 0

The mass number and atomic number must balance in a properly written nuclear equation.

Neutrinos and antineutrinos are also included where appropriate to represent conservation laws in weak nuclear processes.

7. Natural and Artificial Radioactivity

7.1 Natural Radioactivity

Natural radioactivity occurs in naturally existing unstable nuclei.

Examples include:

  • Uranium-238.
  • Uranium-235.
  • Thorium-232.
  • Potassium-40.
  • Carbon-14.

These isotopes occur naturally in the Earth, atmosphere or living systems.

7.2 Artificial Radioactivity

Artificial radioactivity refers to radioactivity produced through nuclear reactions in which stable or other nuclear materials are transformed into radioactive nuclides.

For example, a stable nucleus may be bombarded with neutrons or other particles to produce a radioactive isotope.

Artificial radioactivity is used in:

  • Medical isotope production.
  • Scientific research.
  • Industrial applications.
  • Nuclear technology.

The radioactive decay of an unstable nucleus follows the same fundamental principles whether the isotope occurs naturally or is produced artificially.

8. Radioactive Decay Law

Radioactive decay is a statistical process.

It is impossible to predict exactly when an individual unstable nucleus will decay. However, the behaviour of a large number of radioactive nuclei follows a predictable mathematical pattern.

The number of undecayed nuclei decreases exponentially with time.

The radioactive decay law is:

[
N=N_0e^{-\lambda t}
]

Where:

  • (N) = number of undecayed nuclei after time (t).
  • (N_0) = initial number of nuclei.
  • (\lambda) = decay constant.
  • (t) = elapsed time.
  • (e) = base of natural logarithms.

The decay constant represents the probability of decay per unit time for an individual nucleus in the statistical model.

9. Half-Life

9.1 Definition

The half-life of a radioactive isotope is the time required for half of the radioactive nuclei in a sample to decay.

It is represented by:

[
T_{1/2}
]

The half-life is related to the decay constant by:

[
T_{1/2}=\frac{\ln 2}{\lambda}
]

Since:

[
\ln 2\approx0.693
]

Therefore:

[
T_{1/2}=\frac{0.693}{\lambda}
]

9.2 Half-Life Calculations

After one half-life, half of the original radioactive nuclei remain.

After two half-lives, one-quarter remain.

After three half-lives, one-eighth remain.

Number of half-lives Fraction remaining Percentage remaining
0 1 100%
1 1/2 50%
2 1/4 25%
3 1/8 12.5%
4 1/16 6.25%
5 1/32 3.125%

The fraction remaining after (n) half-lives is:

[
\frac{N}{N_0}=\left(\frac12\right)^n
]

9.3 Worked Example

A radioactive sample has an initial mass of 80 g and a half-life of 5 days.

Find the remaining radioactive mass after 15 days.

Solution:

Number of half-lives:

[
n=\frac{15}{5}=3
]

Remaining mass:

[
m=80\left(\frac12\right)^3
]

[
m=80\times\frac18
]

[
\boxed{m=10,g}
]

After 15 days, 10 g of the original radioactive material remains undecayed.

This calculation assumes that the measured mass refers to the radioactive parent material and that decay products are not counted as the original isotope.

10. Activity of a Radioactive Sample

Activity measures the rate at which radioactive nuclei decay.

It is represented by (A).

[
A=\lambda N
]

Where:

  • (A) = activity.
  • (\lambda) = decay constant.
  • (N) = number of undecayed nuclei.

Activity decreases as the number of undecayed radioactive nuclei decreases.

10.1 Becquerel

The SI unit of radioactive activity is the becquerel.

[
1,Bq=1\text{ decay per second}
]

A sample with an activity of 1,000 Bq undergoes an average of 1,000 nuclear decays per second.

10.2 Curie

The curie is an older, non-SI unit of activity.

[
1,Ci=3.7\times10^{10},Bq
]

The becquerel is the preferred SI unit in scientific work.

11. Mean Lifetime

The mean lifetime of a radioactive nucleus is the average time it survives before decay.

It is represented by (\tau).

[
\tau=\frac{1}{\lambda}
]

The relationship between mean lifetime and half-life is:

[
\tau=\frac{T_{1/2}}{\ln2}
]

Mean lifetime is greater than half-life.

12. Radioactive Dating

Radioactive dating uses the known decay properties of radioactive isotopes to estimate the age of materials.

12.1 Radiocarbon Dating

Carbon-14 is produced in the upper atmosphere through nuclear reactions involving cosmic rays.

It becomes part of atmospheric carbon dioxide and enters living organisms through biological processes.

While an organism is alive, it exchanges carbon with its environment. After death, this exchange largely stops.

The remaining carbon-14 gradually decays.

By measuring the remaining carbon-14 relative to suitable reference values, scientists can estimate the time since the organism died.

Radiocarbon dating is used in:

  • Archaeology.
  • Palaeontology.
  • Environmental science.
  • Historical research.

12.2 Geological Dating

Long-lived radioactive isotopes such as uranium-238 and potassium-40 are used in geological dating.

These methods help determine the ages of rocks and minerals over very long periods.

13. Applications of Radioactivity

13.1 Medical Diagnosis

Radioactive isotopes are used in nuclear medicine to examine the structure and function of organs.

Examples include:

  • Technetium-99m for diagnostic imaging.
  • Fluorine-18 in positron emission tomography.
  • Iodine-123 in certain thyroid diagnostic procedures.

13.2 Cancer Treatment

Radiation can be used to damage the DNA of cancer cells and prevent them from multiplying.

Radioactive sources such as cobalt-60 have been used in external radiotherapy.

Other radioactive isotopes are used in targeted therapies.

13.3 Industrial Radiography

Gamma radiation can pass through materials and reveal internal defects.

Industrial radiography is used to inspect:

  • Welded joints.
  • Metal components.
  • Pipelines.
  • Structural materials.

13.4 Sterilization

Ionizing radiation can destroy microorganisms.

It is used to sterilize selected medical equipment and other products.

13.5 Agriculture and Food Science

Radiation technology is used in certain agricultural and food-processing applications.

Examples include:

  • Food irradiation to reduce harmful microorganisms.
  • Insect pest control.
  • Mutation breeding in plant research.
  • Studies of nutrient movement in plants.

13.6 Nuclear Power

Nuclear reactors use controlled nuclear fission to release energy.

The heat generated is used to produce steam, which drives turbines connected to electrical generators.

14. Biological Effects of Radioactivity

Ionizing radiation has sufficient energy to remove electrons from atoms and molecules.

This process can damage biological structures, including DNA.

The biological effects depend on:

  • Radiation type.
  • Radiation energy.
  • Absorbed dose.
  • Exposure duration.
  • Exposed tissue.
  • Whether radioactive material enters the body.

Potential effects include tissue damage and an increased long-term risk of cancer.

Radiation is not automatically harmful at every exposure level, but unnecessary exposure should be avoided.

15. Radiation Protection

Three basic principles are used to reduce exposure to external radiation.

15.1 Time

Reduce the time spent near a radiation source.

A shorter exposure generally results in a lower accumulated dose.

15.2 Distance

Increase the distance from the radiation source whenever possible.

For a small source approximating a point source, radiation intensity may follow the inverse-square relationship:

[
I\propto\frac{1}{r^2}
]

Where (r) is the distance from the source.

This relationship is an approximation and depends on source geometry and surrounding conditions.

15.3 Shielding

Use suitable shielding materials between the radiation source and the exposed person.

Examples include:

  • Paper or other thin materials for alpha particles.
  • Plastic or aluminium for many beta particles.
  • Thick lead or concrete for gamma radiation.

Neutron radiation requires different shielding approaches, often involving hydrogen-rich materials.

15.4 ALARA Principle

ALARA means As Low As Reasonably Achievable.

It is a radiation protection principle that aims to minimize exposure while considering practical and economic factors.

16. Irradiation versus Radioactive Contamination

These concepts should not be confused.

Irradiation: Exposure to radiation from an external or internal source. An object exposed to radiation does not necessarily become radioactive.

Radioactive contamination: The unwanted presence of radioactive material on or inside a person, object or environment.

For example, an object sterilized by gamma irradiation does not normally become radioactive simply because it was exposed to gamma rays.

However, radioactive contamination can occur if radioactive material is deposited on or enters the object.

17. Important Examination Distinctions

Radioactivity versus radiation: Radioactivity is the nuclear property or process of spontaneous decay. Radiation is the energy or particles emitted.

Alpha versus beta decay: Alpha decay reduces mass number by four and atomic number by two. Beta-minus decay leaves mass number unchanged and increases atomic number by one.

Beta-minus versus beta-plus: Beta-minus decay converts a neutron into a proton. Beta-plus decay converts a proton into a neutron.

Gamma emission versus nuclear transmutation: Gamma emission changes nuclear energy state but does not change the atomic number or mass number.

Half-life versus mean lifetime: Half-life is the time required for half the nuclei to decay. Mean lifetime is the average survival time of a radioactive nucleus.

Activity versus dose: Activity measures nuclear decays per second. Absorbed dose measures energy deposited per unit mass.

Irradiation versus contamination: Irradiation is exposure to radiation. Contamination involves the presence of radioactive material.

36 Key Takeaways for Exams

  1. Radioactivity is the spontaneous transformation of unstable atomic nuclei.
  2. Henri Becquerel discovered natural radioactivity in 1896.
  3. Marie and Pierre Curie discovered polonium and radium in 1898.
  4. Ernest Rutherford made major contributions to the study of radioactive decay.
  5. Paul Villard discovered gamma radiation in 1900.
  6. Nuclear stability depends partly on the balance between protons and neutrons.
  7. A parent nuclide is the original radioactive nucleus.
  8. A daughter nuclide is the nucleus produced after radioactive decay.
  9. Nuclear transmutation occurs when a nucleus changes into a different nuclide.
  10. Alpha decay involves the emission of a helium-4 nucleus.
  11. Alpha decay reduces mass number by four and atomic number by two.
  12. Beta-minus decay converts a neutron into a proton.
  13. Beta-minus decay increases atomic number by one while mass number remains unchanged.
  14. Beta-plus decay converts a proton into a neutron.
  15. Beta-plus decay decreases atomic number by one while mass number remains unchanged.
  16. Electron capture converts a proton into a neutron by capturing an electron.
  17. Electron capture decreases atomic number by one without changing mass number.
  18. Gamma emission releases energy from an excited nucleus.
  19. Gamma emission changes neither atomic number nor mass number.
  20. Radioactive decay is random for individual nuclei but statistically predictable for large samples.
  21. The radioactive decay law is (N=N_0e^{-\lambda t}).
  22. The decay constant is represented by (\lambda).
  23. Half-life is the time required for half the radioactive nuclei to decay.
  24. The half-life relationship is (T_{1/2}=0.693/\lambda).
  25. After three half-lives, 12.5% of the original radioactive nuclei remain.
  26. Radioactive activity is given by (A=\lambda N).
  27. The SI unit of radioactive activity is the becquerel.
  28. One becquerel represents one nuclear decay per second.
  29. One curie equals (3.7\times10^{10}) becquerels.
  30. Mean lifetime is the reciprocal of the decay constant.
  31. Carbon-14 is used in radiocarbon dating.
  32. Technetium-99m is widely used in diagnostic nuclear medicine.
  33. Cobalt-60 has applications in radiotherapy and industrial radiography.
  34. Nuclear radiation can damage biological tissues and DNA.
  35. Radiation protection commonly involves reducing time, increasing distance and using suitable shielding.
  36. Irradiation means exposure to radiation, whereas radioactive contamination means the presence of radioactive material.

 

6 Views