General Science – Physics – Semiconductors, Diodes and Transistors

Semiconductors, Diodes and Transistors

1. Introduction

Semiconductors are materials whose electrical conductivity lies between that of good conductors and insulators.

Their conductivity can be controlled through temperature, light, electric fields and the addition of carefully selected impurities.

Semiconductors form the foundation of modern electronics.

They are used in:

  • Computers
  • Mobile phones
  • Solar cells
  • LED lighting
  • Communication equipment
  • Digital circuits
  • Microprocessors
  • Power electronics
  • Sensors

The most widely used semiconductor material is silicon.

2. Semiconductor Materials

Common semiconductor materials include:

  1. Silicon (Si)
  2. Germanium (Ge)
  3. Gallium arsenide (GaAs)
  4. Silicon carbide (SiC)
  5. Gallium nitride (GaN)

Silicon is particularly important because of its availability, suitable electrical properties and established manufacturing processes.

2.1 Properties of Semiconductors

  1. Their conductivity is between that of conductors and insulators.
  2. Their conductivity can be controlled.
  3. They are sensitive to temperature.
  4. Some semiconductors respond strongly to light.
  5. Their electrical behaviour can be modified through doping.
  6. They are used to manufacture diodes, transistors and integrated circuits.

3. Energy Band Theory

The electrical properties of semiconductors can be explained through energy bands.

Two important energy bands are:

Valence Band: The energy band containing electrons involved in atomic bonding.

Conduction Band: The energy band in which electrons can move through the material and contribute to electrical conduction.

The energy difference between these bands is called the band gap.

Semiconductors have a relatively small band gap compared with insulators.

When sufficient energy is supplied, some electrons move from the valence band to the conduction band.

This leaves vacancies called holes in the valence band.

Both electrons and holes contribute to semiconductor conduction.

4. Intrinsic Semiconductors

An intrinsic semiconductor is a pure semiconductor without intentionally added doping impurities.

Pure silicon and germanium are examples.

At absolute zero, an ideal intrinsic semiconductor has no thermally generated free carriers.

At ordinary temperatures, some electrons gain sufficient thermal energy to move into the conduction band.

This produces:

  • Free electrons
  • Corresponding holes

In an intrinsic semiconductor, the number of free electrons equals the number of holes.

4.1 Electron-Hole Pairs

When an electron gains enough energy to leave a covalent bond and enter the conduction band, it leaves behind a hole.

The electron and hole are generated as a pair.

The electron can move through the conduction band, while the hole behaves as a positive charge carrier in the valence band.

5. Extrinsic Semiconductors

An extrinsic semiconductor is produced by adding controlled impurities to a pure semiconductor.

This process is called doping.

Doping increases the number of available charge carriers and improves the electrical conductivity of the material.

There are two major types:

  1. N-type semiconductor
  2. P-type semiconductor

6. N-Type Semiconductors

An N-type semiconductor is produced by doping silicon or germanium with a pentavalent impurity.

A pentavalent atom has five valence electrons.

Common donor impurities include:

  • Phosphorus
  • Arsenic
  • Antimony

Four electrons form covalent bonds with neighbouring semiconductor atoms.

The fifth electron is relatively easily available for conduction.

Therefore:

  • Electrons are the majority carriers.
  • Holes are the minority carriers.

N-type semiconductor material remains electrically neutral overall.

7. P-Type Semiconductors

A P-type semiconductor is produced by doping silicon or germanium with a trivalent impurity.

A trivalent atom has three valence electrons.

Common acceptor impurities include:

  • Boron
  • Aluminium
  • Gallium
  • Indium

The impurity forms three covalent bonds with neighbouring atoms, leaving one incomplete bond or hole.

Therefore:

  • Holes are the majority carriers.
  • Electrons are the minority carriers.

P-type semiconductor material also remains electrically neutral overall.

8. Comparison of N-Type and P-Type Semiconductors

Feature N-Type P-Type
Dopant Pentavalent impurity Trivalent impurity
Common examples Phosphorus, arsenic Boron, gallium
Majority carriers Electrons Holes
Minority carriers Holes Electrons
Dopant role Donor Acceptor

The letters N and P refer to the dominant charge carriers, not to the overall electrical charge of the semiconductor.

9. P-N Junction

A P-N junction is formed by joining P-type and N-type semiconductor regions within a semiconductor device.

When the two regions are joined, electrons diffuse from the N-side towards the P-side, while holes diffuse in the opposite direction.

Near the junction, electrons and holes recombine.

This creates a depletion region containing fixed ionized donor and acceptor atoms.

An internal electric field develops across the depletion region, creating a potential barrier.

The P-N junction is the fundamental structure of an ordinary semiconductor diode.

10. Semiconductor Diodes

A diode is a two-terminal semiconductor device that allows current to flow easily in one direction under forward-bias conditions while strongly restricting current in the opposite direction under reverse-bias conditions.

An ordinary P-N junction diode has:

  • Anode: P-type side
  • Cathode: N-type side

The diode symbol is commonly represented by a triangle-free arrow-like current direction marker in circuit diagrams, with the cathode shown by a bar.

11. Forward Bias

A P-N junction is forward-biased when:

  • The positive terminal of the supply is connected to the P-side.
  • The negative terminal is connected to the N-side.

Forward bias reduces the potential barrier and narrows the depletion region.

When the applied voltage is sufficiently high, substantial current flows through the diode.

Typical approximate forward voltage drops are:

  • Silicon diode: 0.7 V
  • Germanium diode: 0.3 V

These are simplified values, not fixed universal thresholds. Actual forward voltage depends on current, temperature and device characteristics.

12. Reverse Bias

A P-N junction is reverse-biased when:

  • The positive terminal is connected to the N-side.
  • The negative terminal is connected to the P-side.

Reverse bias increases the potential barrier and widens the depletion region.

Only a very small reverse leakage current normally flows.

If the reverse voltage reaches the breakdown region, a large reverse current may flow. Suitable diodes are designed to operate safely in this region, while ordinary diodes may be damaged if the current is not limited.

13. Types of Diodes

13.1 Rectifier Diode

A rectifier diode converts AC into pulsating DC.

It is commonly used in power supplies.

13.2 Light-Emitting Diode (LED)

An LED emits light when forward-biased current passes through it.

It is used in:

  • Lighting
  • Displays
  • Indicators
  • Digital screens
  • Optical communication

13.3 Zener Diode

A Zener diode is designed to operate in reverse breakdown under specified conditions.

It is commonly used for voltage regulation and reference circuits.

13.4 Photodiode

A photodiode converts incident light into an electrical current.

It is used in:

  • Light sensors
  • Optical communication
  • Automatic lighting
  • Camera systems

13.5 Schottky Diode

A Schottky diode uses a metal-semiconductor junction.

It generally has a relatively low forward voltage drop and fast switching characteristics.

It is used in switching power supplies and electronic circuits.

13.6 Varactor Diode

A varactor diode is designed to operate under reverse bias so that its junction capacitance varies with applied voltage.

It is used in radio-frequency tuning circuits.

14. Applications of Diodes

Diodes are used in:

  1. AC-to-DC rectification.
  2. Voltage regulation.
  3. Signal detection.
  4. Light emission.
  5. Light sensing.
  6. Circuit protection.
  7. Electronic switching.
  8. Voltage multiplication circuits.

15. Transistors

A transistor is a semiconductor device used primarily for amplification and switching.

Transistors are fundamental components of modern electronic systems.

They are used in:

  • Computers
  • Mobile phones
  • Radios
  • Television equipment
  • Digital circuits
  • Power supplies
  • Control systems
  • Communication devices

There are two major categories of transistors:

  1. Bipolar junction transistors (BJTs)
  2. Field-effect transistors (FETs)

16. Bipolar Junction Transistor (BJT)

A BJT is a three-terminal semiconductor device in which both electrons and holes participate in current conduction.

Its three terminals are:

  • Emitter
  • Base
  • Collector

There are two principal types:

16.1 NPN Transistor

An NPN transistor consists of:

  • N-type emitter
  • P-type base
  • N-type collector

Electrons are the principal charge carriers responsible for conduction.

16.2 PNP Transistor

A PNP transistor consists of:

  • P-type emitter
  • N-type base
  • P-type collector

Holes are the principal charge carriers responsible for conduction.

16.3 Transistor Operation

A small base current in a BJT can control a much larger collector current when the transistor operates in its active region.

For a simplified common-emitter model:

[
\boxed{I_C=\beta I_B}
]

Where:

  • (I_C) = collector current
  • (I_B) = base current
  • (\beta) = common-emitter current gain

The total emitter current is:

[
\boxed{I_E=I_C+I_B}
]

17. Field-Effect Transistors

A field-effect transistor controls current through an electric field.

It is generally a voltage-controlled device.

Its three principal terminals are:

  • Gate
  • Source
  • Drain

Important types include:

17.1 Junction Field-Effect Transistor (JFET)

A JFET controls current through a semiconductor channel using an electric field produced by a reverse-biased gate junction.

17.2 Metal-Oxide-Semiconductor Field-Effect Transistor (MOSFET)

A MOSFET uses an insulated gate to control current through a semiconductor channel.

MOSFETs are widely used in:

  • Computer processors
  • Digital integrated circuits
  • Power switching
  • Motor controllers
  • Electronic power supplies

18. Transistors as Amplifiers

A transistor can amplify an electrical signal.

A small input signal controls a larger output signal, with energy supplied by the external power source.

Amplifiers are used in:

  • Audio systems
  • Radio receivers
  • Microphones
  • Communication equipment
  • Sensor circuits

The transistor does not create energy. It controls energy supplied by the power source.

19. Transistors as Electronic Switches

Transistors can operate as electronic switches.

A BJT is commonly described using three operating regions:

  • Cut-off
  • Active
  • Saturation

In switching applications:

Cut-off: The transistor is effectively OFF.

Saturation: The transistor is strongly ON.

The active region is generally used for linear amplification.

MOSFETs are also widely used as electronic switches in digital and power circuits.

20. Integrated Circuits

An integrated circuit (IC) is a semiconductor chip containing many interconnected electronic components.

These components may include:

  • Transistors
  • Diodes
  • Resistors
  • Capacitors
  • Interconnections

Integrated circuits are used in:

  • Microprocessors
  • Memory devices
  • Digital watches
  • Mobile phones
  • Computers
  • Communication systems
  • Industrial controllers

Modern integrated circuits can contain billions of transistors.

21. Worked Numerical Problems

Problem 1: Transistor Current Gain

A BJT has a base current of 40 μA and a current gain of 100. Calculate its collector current.

Solution

[
I_C=\beta I_B
]

[
I_C=100\times40,\mu A
]

[
\boxed{I_C=4000,\mu A=4,mA}
]

Problem 2: Emitter Current

A transistor has a collector current of 5 mA and a base current of 0.05 mA. Calculate the emitter current.

Solution

[
I_E=I_C+I_B
]

[
I_E=5+0.05
]

[
\boxed{I_E=5.05,mA}
]

Problem 3: Semiconductor Conductivity

A semiconductor has a resistivity of (0.5,\Omega m). Calculate its conductivity.

Solution

[
\sigma=\frac{1}{\rho}
]

[
\sigma=\frac{1}{0.5}
]

[
\boxed{\sigma=2,S/m}
]

22. Common Examination Distinctions

Concept Meaning
Intrinsic semiconductor Pure semiconductor
Extrinsic semiconductor Semiconductor modified by doping
N-type Semiconductor with electrons as majority carriers
P-type Semiconductor with holes as majority carriers
Donor impurity Pentavalent impurity supplying electrons
Acceptor impurity Trivalent impurity creating holes
P-N junction Boundary between P-type and N-type regions
Forward bias Bias condition that permits substantial diode conduction
Reverse bias Bias condition that strongly restricts ordinary diode current
LED Diode that emits light
Zener diode Diode designed for controlled reverse-breakdown operation
Photodiode Semiconductor device that detects light
BJT Bipolar junction transistor
MOSFET Metal-oxide-semiconductor field-effect transistor
Integrated circuit Electronic circuit manufactured on a semiconductor chip

23. 36 Key Takeaways for Exams

  1. Semiconductors have conductivity between that of conductors and insulators.
  2. Silicon is the most widely used semiconductor material.
  3. Germanium and gallium arsenide are other semiconductor materials.
  4. The valence band contains electrons associated with atomic bonding.
  5. The conduction band contains mobile electrons that can contribute to current.
  6. The energy gap between these bands is called the band gap.
  7. An intrinsic semiconductor is a pure semiconductor.
  8. An extrinsic semiconductor is produced through doping.
  9. Doping increases the electrical conductivity of a semiconductor.
  10. Electrons and holes are the principal charge carriers in semiconductors.
  11. An intrinsic semiconductor has equal numbers of electrons and holes.
  12. An N-type semiconductor is produced using pentavalent donor impurities.
  13. Electrons are the majority carriers in N-type semiconductors.
  14. A P-type semiconductor is produced using trivalent acceptor impurities.
  15. Holes are the majority carriers in P-type semiconductors.
  16. The majority carriers are not the same as the overall electrical charge of the material.
  17. A P-N junction is formed by joining P-type and N-type semiconductor regions.
  18. The depletion region develops near a P-N junction.
  19. A diode is a two-terminal semiconductor device.
  20. The P-side of a diode is called the anode.
  21. The N-side of a diode is called the cathode.
  22. Forward bias reduces the potential barrier of a P-N junction.
  23. Reverse bias increases the potential barrier of a P-N junction.
  24. A typical silicon diode has an approximate forward voltage drop of 0.7 V under common operating conditions.
  25. An LED emits light when forward-biased current flows through it.
  26. A Zener diode is commonly used for voltage regulation.
  27. A photodiode converts incident light into an electrical signal.
  28. A transistor is used for amplification and electronic switching.
  29. A BJT has emitter, base and collector terminals.
  30. NPN and PNP are the two principal types of BJT.
  31. A BJT uses both electrons and holes in its conduction process.
  32. A MOSFET is a voltage-controlled field-effect transistor.
  33. A MOSFET has gate, source and drain terminals.
  34. A transistor can operate as an amplifier or electronic switch.
  35. Integrated circuits contain interconnected electronic components on semiconductor chips.
  36. Semiconductors, diodes and transistors are the foundation of modern computers, communication systems and electronic devices.
3 Views